The piezoelectric properties of bone play an important role in the bone remodeling process and can be employed in clinical bone repair. In this study, the piezo-voltage of bone between two surfaces of a bone beam under bending deformation was measured using an ultra-high-input impedance bioamplifier. The influence of shear stress on the signs of piezo-voltages in bone was determined by comparin...

In order to identify physical model parameters of a high-rise building, a new story stiffness identification method is presented based on a shear-bending model and the identification function. Although a shear building model may be the simplest conventional model for representing tall buildings, the system identification (SI) method using that model is not necessarily appropriate. This is becau...

Telescopic booms are key elements for payload lifting in construction machineries. They usually consist of thin-walled hollow segments that can retract, extend or elevate during operation. The mechanical properties of the telescopic booms directly determine the lifting capacity of these machines. The overlapping contact regions between the adjacent booms are critical locations where high stress...

In this paper, a bio-inspired bending actuator was designed and fabricated using piezoelectric patches and cantilever-shaped beam for controlling nose shape. The aim of this study is to investigate the use of the bending actuator. PZT and single crystal PMN-PT actuators were used to generate translational strain and shear stress. The piezoelectric patches were attached on the clamped cantilever...

Laser forming of sheet metal offers the advantages of requiring no hard tooling and thus reduced cost and increased flexibility. It also enables forming of some materials and shapes that are not possible now. In single-axis laser bending of plates, the bending edge is found to be somewhat curved and the bending angle varies along the laser-scanning path. These phenomena are termed edge effects,...

In this research, the structural behavior of timber and concrete sleepers in a standard railway turnout is evaluated, in the case of raising speed. In approaching this evaluation, current practices in the structural analysis of sleepers are surveyed and then, the sensitivity analysis with ABAQUS software is made based on selected criteria (bending and shear stresses as well as contact pressure)...

Article history: Received 2.11.2012 Received in revised form 10.12.2012 Accepted 10.12.2012 Copper alloy has a lot of excellent properties, so it becomes an important alloy for lead frame materials for the integrated circuit. The minimum bending radius of three different copper alloys (Cu-Fe-P, Cu-Ni-Si, Cu-Cr-Sn-Zn) for lead frame materials was analyzed by using finite element. Tensile tests f...

A novel fiber-optic bending sensor based upon the propagation of LP21 mode is demonstrated. The sensor, comprised of an S-bend fiber on an elastic film, measures LP21 mode specklegram rotation, which increments linearly with bending angle by the stress-optic effect. The sensor is capable of experimentally achieving a sensitivity as high as 4.13 rad/m(-1). The theoretical analysis of the sensor,...