The aim of the present study was to find a more optimal blade design for rowing performance than the Big Blade, which has been shown to be less than optimal for propulsion. As well as the Big Blade, a flat Big Blade, a flat rectangular blade, and a rectangular blade with the same curvature and projected area as the Big Blade were tested in a water flume to determine their fluid dynamic characte...

Abstract— Forging is a very complex process and the measurement of actual forces for real material is difficult and cumbersome. The main objective of this document is to use the analytical methods for measuring parameters such as load, and stress distribution of forging process and use them to make simple, reliable, fast and non-expensive simulation tools, contrary to the commercial software’s ...

The finite element method plays an extremely important role in forging process design as it provides a valid means to quantify forging errors and thereby govern die shape modification to improve the dimensional accuracy of the component. However, this dependency on process simulation could raise significant problems and present a major drawback if the finite element simulation results were inac...

in this paper, the fluid-structure interaction phenomenon and the research history are described. then due to the complex and specific working conditions of a turbine blade, we have investigated the phenomenon on this subject. the fluid-structure interaction on a turbine blade model has been simulated by using structural and fluid flow section of ansys software. a model of turbine blade with ai...

Recent evolutions on forging process induce more complex shape on forging die. These evolutions, combined with High Speed Machining (HSM) process of forging die lead to important increase in time for machining preparation. In this context, an original approach for generating machining process based on machining knowledge is proposed in this paper. The core of this approach is to decompose a CAD...

Within the manufacturing process planning, blanks are either selected or designed, respectively forms of input material for the manufacture of products. Reviewed in this paper are three types of group blanks: group castings, group forgings manufactured by closed die forging and free forging, and group blanks manufactured by pressing melted metal in casts. The paper also presents requisites for ...

The influence of the sinter-forging rate on the critical cur ren t density (J,) behaviour in an external field a n d on the contact resistance R, for Bi-2223 cur ren t leads has been investigated. The cur ren t leads were fabricated by a combination of Cold Isostatic Pressing (CIP) and sinter-forging methods with the thickness reduction rate ranging from 0% to 90%. The two silver contact termin...

Initial location of the billet and the shape of die have an important effect on parameters of precision forging. Some of these effects are the contact stresses, material flow, distribution of stress, and also strain. In the present study, the die shape influences and the billet position in precision forging of two different shape groups have numerically and experimentally been investigated. Res...

We give a simple argument proving the lonely runner conjecture in the case where the speed of the runners forms a certain lacunary sequence. This improves an earlier result by Pandey, and is then used to derive that for each number of runners the lonely runner conjecture is true for a set of nonzero measure in a natural probability space.