In this study, a technique has been proposed for developing constitutive models for polymer composite systems reinforced with single-walled carbon nanotubes (SWNT) with various orientations with respect to the bulkmaterial coordinates. A nanotube, the local polymer adjacent to the nanotube, and the nanotube/polymer interface have been modeled as an equivalent-continuum fiber by using an equival...

The rapid heating of carbon-fiber-reinforced polymer matrix composites leads to complex thermophysical interactions which not only are dependent on the thermal properties of the constituents and microstructure but are also dependent on the thermal transport between the fiber and resin interfaces. Using atomistic molecular dynamics simulations, the thermal conductance across the interface betwee...

Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this resear...

Carbon fiber reinforced polymer (CFRP) sheets can be externally bonded for retrofit of concrete structures, improving flexure and sheer strength in the concrete. The key to CFRP sheets is the bond to the concrete, as bond is the means to transfer stress between the tow sheet and the concrete. Experimentation has been conducted to test a current market fiber-resin system, and to develop a resin ...

Glass fiber reinforced polymer composites are one of the most widely used composite materials. The addition of Coal ash to polymer matrix dramatically increases the overall mechanical strength of the composite material as compared to the polymer composite. In view of this, a method is proposed for mixing coal ash powder (size 52-75 μm) into resin and Ash reinforced polymer composites are fabric...

Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...

Release agents are applied as a liquid that forms a thin film coating to aid removal of carbon-fiber-reinforced polymer (CFRP) parts from a mold or peel ply. This process, however, leads to inevitable contact transfer, causing release agent to remain on the part or repair. Before painting or bonding of the CFRP component to other structures, proper post-treatment to remove vaporizable component...