Nigeria is blessed with abundant iron ore deposits of nearly 3 billion tonnes and other basic minerals for steel production including coal and limestone. Yet the Nigerian steel sector has collapsed principally due to shortage of raw materials particularly iron ore for the integrated steel plants and billets for the rolling mills. The privatization of the steel sector that was done in 2004-2005 ...

In the present work CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and AISI 1009 low carbon steel plates. Laser power, welding speed, and defocusing distance combinations were carefully selected with the objective of producing welded joint with complete penetration, minimum fusion zone size and acceptable welding pro...

A stainless-steel mesh loaded with nickel catalyst was produced and used for the pyrolysis-catalysis of waste high-density polyethylene with the aim of producing high-value carbon products, including carbon nanotubes (CNTs). The catalysis temperature and plastic-to-catalyst ratio were investigated to determine the influence on the formation of different types of carbon deposited on the nickel-s...

The mechanical properties of medium carbon steel (0.36C) were investigated under two different quenching media (water and palm oil). The properties are: the strengths, impact and hardness of the material. The investigations centered on unheat treated, normalized; water and palm oil quenched, and tempered conditions. The tempering temperature is 200°C. An AISI steel of grade C1035 was used for c...

Coiled tubing corrosion was investigated for 16 field water samples (S5 to S20) from a Canadian shale gas field. Weight loss corrosion rates of carbon steel beads incubated with these field water samples averaged 0.2 mm/yr, but injection water sample S19 had 1.25±0.07 mm/yr. S19 had a most probable number of zero acid-producing bacteria and incubation of S19 with carbon steel beads or coupons d...

in the present study, the microstructure and mechanical properties of the dissimilar welding betweenastm a335 low alloy steel and er309l austenitic stainless steel were investigated using the gastungsten arc welding process. the welding of dissimilar materials between astm a335 low alloy steeland er309l austenitic stainless steel was found to have a significant effect on the microstructure when...

in this work, electrochemical methods such as tafel polarization and electrochemical impedance spectroscopy (eis) were used to study the inhibition efficiency of nettle leaves hydroalcoholic extract as a green corrosion inhibitor of api 5l carbon steel in 0.5 m h2so4 solution. the results showed that the inhibition efficiency was increased with increasing the concentration of the extract and th...

The redistribution of carbon after tempering of a novel nanocrystalline bainitic steel consisting of a mixture of supersaturated ferrite and retained austenite has been analyzed by atom probe tomography. No direct evidence supporting the additional carbon enrichment of austenite beyond that initially achieved during the bainite heat treatment was obtained during subsequent tempering of this hig...

In this work, we investigated the effects of surface roughness and agitation on the morphology of magnetite films electrodeposited from alkaline Fe(III)-triethanolamine (TEA) solutions on carbon steel substrates. The surface roughness of the carbon steel substrates was maintained in the range of 1.64–0.06 μm by using mechanical grinding and polishing methods. The agitation speed was set at 0 an...