background diatomite coated by nanoparticles of copper and zinc mixed oxides were used to investigate catalytic oxidation of carbon monoxide. objectives aim of this paper was to investigatediatomite performance as a supporting host to confine the cuo and zno nanoparticles and its catalytic activity for carbon monoxide oxidation. materials and methods the prepared catalysts were characterized by...

palladium is the best metal catalyst for suzuki cross coupling reaction for synthesize of unsymmetrical biaryl compounds. but its high cost limits its application in wide scale. using of nanoscale particles as active catalytic cites is a good approach for reducing needed noble metal. by loading precious nanoparticles on magnetic nanocores as a support, recycling and reusing of catalyst will be ...

Palladium nanoparticles were grown on sub-millimeter activated Al2O3 particle support by spraying H2PdCl4 solution evenly onto the support, followed with a thermal reduction under H2 atmosphere. Compared with its counterpart created by the conventional impregnation method, the Pd/Al2O3 catalyst created by the spray process could enrich the existence of active Pd nanoparticles on the surface of ...

a series of fe3o4 supported on mesoporous fdu-12 silica systems were prepared by the hydrothermal conditions. the surface properties of the functionalized catalyst were analyzed by a series of characterization techniques like ftir, xrd, n2 adsorption–desorption and tem. xrd and adsorption–desorption analysis shows that the mesostructure of fdu silica remains intact after fe3o4 modifications, wh...

the reaction kinetics of the isomerization 3,4-dichlorobutene-1 to 1,4-dichlorobutene-2 was investigated by using gas-liquid chromatography method in the presence of fe2o3/mgo as solid catalyst in the temperature range 25-55°c. fe2o3/mgo has been prepared by the support saturation method, tested in the isomerization of 3, 4-dichlorobutene-1 into 1, 4-dichlorobutene-2. this catalyst shows a high...

ru/al2o3 catalysts were prepared by conventional incipient wetness impregnation as well as colloid deposition of rucl3 precursor via in situ reduction with ethylene glycol (polyol) method on alumina support. the samples were characterized by tem, xrd and tpr techniques. the catalytic performance tests were carried out in a fixed-bed micro-reactor under different operating conditions. ethylene g...

One of the most critical phenomena that limits the lifetime of ceramic catalysts for H2O2 decomposition is represented by substrate break-up as a consequence of thermal shocking. In a recent experimental campaign conducted by Alta S.p.A., Pisa, Italy, fracture of the ceramic support occurred in a Pt/γ–Al2O3 catalytic bed. Because of the catalyst rupture, the onset of a number of flow instabilit...

Niobium was doped into anatase TiO2 support at 10 mol % Nb0.1Ti0.9O2 using sol-gel chemistry. A PtRu/Nb0.1Ti0.9O2 catalyst was synthesized by LiBH4 reduction in tetrahydrofuran. The methanol electro-oxidation activity of the catalyst shows that this oxide support was electrically conductive. The current A/gPt was 6% higher on the PtRu/Nb0.1Ti0.9O2 catalyst compared to a commercial PtRu/C cataly...

The development of a low-cost, high-performance platinum-group-metal-free hydroxide exchange membrane fuel cell is hindered by the lack of a hydrogen oxidation reaction catalyst at the anode. Here we report that a composite catalyst, nickel nanoparticles supported on nitrogen-doped carbon nanotubes, has hydrogen oxidation activity similar to platinum-group metals in alkaline electrolyte. Althou...

A PdPt (10 wt% Pt) catalyst is used to replace platinum at the cathode of a PEMFC MEA whereas pure palladium is used as the anode catalyst. The catalysts are deposited on commercial carbon woven web and carbon paper GDLs by plasma sputtering. The relations between the depth density profiles, the electrode support and the fuel cell performances are discussed. It is shown that the catalyst gradie...