A novel active feedback frequency compensation scheme is presented in this work. Based on the proposed technique, an amplifier with two main poles in its frequency bandwidth can be easily compensated by introducing a pole-zero pair in a local feedback. The proposed method is mathematically analyzed and then based on the derived formulations, a design procedure is established. The capability of ...

This report describes the development of a transimpedance amplifier that takes current as input and gives voltage as output. The amplifier consists of three CMOS amplifier stages in a fed-back configuration, achieving a transimpedance gain over 3 kΩ and a 3-dB bandwidth greater than 2.8 GHz. The amplifier operates with a 1.5 V supply voltage and a power budget of 30 mW.

In this paper, a 10-Gb/s inductorless CMOS receiver front end is presented, including a transimpedance amplifier and a limiting amplifier. The transimpedance amplifier incorporates Regulated Cascode (RGC), active-inductor peaking, and intersecting active feedback circuits to achieve a transimpedance gain of 56 dB and a bandwidth of 8.27 GHz with a power dissipation of 35 mW. The limiting amplif...

Since the fabrication of active electrodes has been reported and their beneficial effects scientifically confirmed, we present a CMOS bioelectric amplifier with DC rejection designed for active electrode in this paper. Analysis, design and post simulation results will be described in detail. The amplifier operating at ±0.9V supply voltage has a mid-band gain of 40dB with ±300mV dc offset reject...

Currently, the cellphone industry is moving towards an integrated CMOS solution for power amplifiers. Cheaper phones for consumers and better bottom lines for companies are the result of this. The goal of this thesis is to investigate the use of pulse width modulation in a high efficiency integrated CMOS power amplifier for a wireless application. Though high efficiency CMOS power amplifiers ex...

We have been developing low power cryogenic readout electronics for space borne large format far-infrared image sensors. As the circuit elements, a fully-depleted-silicon-on-insulator (FD-SOI) CMOS process was adopted because they keep good static performance even at 4.2 K where where various anomalous behaviors are seen for other types of CMOS transistors. We have designed and fabricated sever...

Abstract—In this paper, a CMOS differential operational transresistance amplifier (OTRA) is presented. The amplifier is designed and implemented in a standard umc90-nm CMOS technology. The differential OTRA provides wider bandwidth at high gain. It also shows much better rise and fall time and exhibits a very good input current dynamic range of 50 to 50 μA. The OTRA can be used in many analog V...

This paper presents an excitatory CMOS power consumption and circuit size, which is ideal for integrator is built using operational amplifier. This circuitry is realized in TSMC 0.18μm CMOS Technology. Switched Capacitor (SC) integrator circuit The SC integrator correlated double

A 5GHz low power consumption LNA has been designed here for the receiver front end using 90nm CMOS technology. The ‘current reuse’ technique has been used here to reuse the bias current for two amplifier stages stacked upon each other. An inverter type amplifier acts the second stage to a common source first stage thereby giving a good gain for the amplifier. The gain achieved is around 13dB wi...

In this paper, reduced power consumption, low-noise CMOS amplifier using chopper technique is designed, chopper-equalized amplifier had been used as a front end of a voltage-to-frequency converter instrument which performs pretty well, and they were meeting just about every specification, but they had a problem with undesired and unpleasant little offset shifts and jumps. Trying to solve this p...