Coal fly ashes (CFA) are complex particles of a variable composition, which is mainly dependent on the combustion process, the source of coal and the precipitation technique. Toxic constituents in these particles are considered to be metals, polycyclic aromatic hydrocarbons and silica. The purpose of this review was to study the in vitro and in vivo data on coal fly ash and relate the studied e...

Fly ash is one of coal ashes resulted from power plants using coal to generate electricity. As a result of large utilization of coal, large volumes of coal ash produced as waste material. Direct use of these materials in construction projects, not only provides a promising solution to the disposal problem, but also as an alternative for structural fills material. High shear strength, low compre...

Many research studies were carried out for effective utilization of fly ash and pond ash in building industry as it possess suitable pozzolanic properties .They are produced in large quantities during the combustion of coal for energy production and recognized as an environmental pollution. Fly ash and Pond ash utilization in building materials have many advantages like cost effectiveness, envi...

Mercury stable isotope abundances were used to trace transport of Hg-impacted river sediment near a coal ash spill at Harriman, Tennessee, USA. δ(202)Hg values for Kingston coal ash released into the Emory River in 2008 are significantly negative (-1.78 ± 0.35‰), whereas sediments of the Clinch River, into which the Emory River flows, are contaminated by an additional Hg source (potentially fro...

The Olang area is a part of Gheshlagh-Olang synclinal, which is a member of eastern Alborz coal basin and is situated at a distance of70 km northeast of Shahroud city. Coal-bearing strata of this region are part of the Shemshak group (Upper Triassic to Lower Jurassic).Samples from the 9 coal seams of the Olang coal deposits were collected and ashed. The aim of this study is to determine theoccu...

Tabas mines in Iran have coal sources which are suitable for use in metallurgy industries as coking coal. But the high sulfur content of this coal imposes severe limitations on its utilization as the sulfur oxide gases evolved from the combustion of high sulfur coals result in acid rains and corrosion of equipments. In this work, attempts have been made to reduce sulfur from high sulfur coa...

Investigations were carried out on coal tailings by conventional cell and column flotation techniques. Tests were conducted to assess processing coal tailings of Alborz Markazi coal washing plant in Iran by column flotation. The effects of reagent type/dosage were investigated with conventional flotation and their results were used in the performance of column flotation. Also the effects of the...

The levels of trace elements and polycyclic aromatic hydrocarbons (PAHs) in fly ash generated by coal combustion have received considerable attention in recent years, due to their potential environmental impact. Sixteen high priority PAHs and 14 trace elements in coal fly ash were measured. The particle sizes of fly ash showed a bimodal distribution, and most ash particles were within a range o...

Scanning electron microscopy with wavelength-dispersive spectrometry has been used to measure trace metals in coal and ash. Hg, As. Ni, and Se have been detected in individual pyrite grains in Illinois #6 coal at levels up to 2680 ppm, 410 ppm, 320 ppm, and 880 ppm, respectively. These elements were present in fewer than half the grains analyzed. Cr has been detected at up to 950 ppm in half of...

Under a consent agreement among the Environmental Protection Agency (EPA) and proponents both for and against stricter regulation, EPA is to issue a new coal ash disposal rule by the end of 2014. Laboratory toxicity investigations often yield conservative estimates of toxicity because many standard test species are more sensitive than resident species, thus could provide information useful to t...