The aim of this paper is to study the effect of EMI in Switched mode PWM Inverter fed AC drive. This Switched mode PWM Inverter has an inherent noise source. This noise is mitigated by a New Active Common Mode Electro Magnetic Interference Filter (ACEF) which is proposed for switched mode power supply applications. The proposed filter is based on current sensing and a compensation circuit which...

The industry and academia are focusing their efforts on finding more efficient reliable electrical machines motor drives. However, many of the motors driven by pulse-width modulated converters face recurring problem common-mode voltage (CMV). In fact, this leads to other problems such as bearing breakdown, deterioration stator winding insulation electromagnetic interferences (EMI) that can affe...

This paper describes a method for reducing the common-mode voltage in seven-phase brushless DC motor (BLDC) drive. The conventional interleaved used three-phase inverter system is extended and applied. proposed phase-phase studied to apply six-phase excitation controlling BLDC. switching functions related with modulation index (MI) angle are obtained, average of derived mathematically. control ...

In sampling mode, S, and S, are on, the voltage across C,,tracks Vi,,, and 4 is configured as a unity-gain amplifier. In transition to the hold mode, S, and S, turn off and C,maintains a unity-gain loop around 4. In this topology, both charge injection of S, and S, and hold-mode droop appear as a common-mode voltage at the inputs of 4, allowing smaller values for C, and C , than in a single-en...

The trans-admittance-mode (TAM) might act as a transforming bridge for voltage-mode to current-mode conversion. In this study a new low voltage operated electronically tunable TAM biquad filter structure realizing all the seven standard filtering functions namely; low-pass (LP), band-pass (BP), high-pass (HP), regular-notch (RN), low-pass-notch (LPN), high-pass-notch (HPN) and all-pass (AP) fro...

A fast-response and wide-view fringe-field switching LCD using patterned common electrodes is proposed. By applying a restoring pulse voltage on common electrodes, LC decay process is expedited. The GTG decay time can be reduced by >7X, depending on the applied erasing voltage. This new mode also preserves the wide-view characteristics as the conventional FFS mode. It is attractive for reducing...

damping of a full-scale cable with a pair of passive–on magnetorheological (mr) dampers was tested. a cable of 215.58m long with the first mode frequency of 0.658hz was tensioned horizontally in cable prefabrication factory. two mr dampers were attached to the cable in an angle in the plane perpendicularly to the cable axis in 5m length from the cable anchorage. the applied voltage level was 0v...

PWM Inverters in induction motor drives are known to cause common-mode voltage which results in leakage current flowing through the parasitic capacitors to the ground and creates drawbacks such as shaft voltage, bearing current, electromagnetic interference problems. CMV elimination using conventional Three-level NPC multilevel topology has certain drawbacks. An improved SVPWM strategy using Du...