One of the main goals of the metal-mechanical industries is the reduction of the production costs through the productivity increase. In the attempt to reach this goals, many researchers have been used the hot machining method. This method consists, basically, in the heating of the work piece hundreds of degrees Celsius above room temperature with aid of an external source of heat. Thus, the red...

& Minimum Quantity Lubrication (MQL) machining involves the application of a minute amount of an oil-based lubricant to the machining process in an attempt to replace the conventional flood coolant system. Understanding the correlations between fluid properties and MQL performance can help in selecting lubricants from a variety of choices without going through extensive machining tests. This st...

The increasing demand of micro or miniature parts and the development of the micro machining processes are the cause of the growing of micro wire electrical discharge machining (μ-WEDM). μ-WEDM has the ability to manufacture complicate shapes with high accuracy and provides the advantage of machining any conductive materials regardless of their mechanical properties in the absence of significan...

With the increasing demands of high surface irregularities and machining of composites, conventional machining processes are now being replaced by high speed Computer Numerical Control (CNC) machines. In this paper aluminium silicate made from alloying aluminium and silicon oxide made from rice husk are used. The machining of the alloy on CNC machine is carried out. In addition to speed, feed a...

Electrical Discharge Machine (EDM) is especially used for the manufacturing of 3-D complex geometry and hard material parts that are extremely difficult-to-machine by conventional machining processes. In this paper authors review the research work carried out in the development of die-sinking EDM within the past decades for the improvement of machining characteristics such as Material Removal R...

In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...

the use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. laser assisted machining (lam) improves the machinability of high strengt...

In micro-electrical discharge machining (micro-EDM), dielectric plays a significant role during the machining process as different types of dielectrics have different chemical compositions, cooling rates and dielectric strengths. For this, dissimilar process responses are accounted when machining in EDM at micron level. The present paper investigates micro-EDM characteristics such as material r...

In manufacturing by machining, thermal loads on cutting tools can have a major influence on tool wear and hence process cost, especially at higher cutting speeds. An investigation has been undertaken to determine heat partition into the cutting tool for high-speed machining of AISI/SAE 4140 high-strength alloy steel with uncoated and TiN-coated tools. The cutting tests have been performed at cu...