This paper deals with design method for structure of injection mold fabricated by Metal Laser Sintering, which is one of the rapid prototyping technologies. This technology provides mold with more sophisticated function and improvement of formability and productivity. To realize structure of mold with these advantages, the method has been developed by following processes : (1)Specifying importa...

Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...

To deal with the problem of high cost and low accuracy existed in conventional methods for the lead-zinc sintering blending, a qualitative and quantitative synthetic methodology for sintering blending optimization is presented in this paper. First, two prediction models are built based on a process neural network and the improved grey system theory. Next, these two models are integrated into on...

Ceramic-based microchemical systems (μCSs) are more suitable for operation under harsh environments such as high temperature and corrosive reactants compared to the more conventional μCS materials such as silicon and polymers. With the recent renewed interests in chemical manufacturing and process intensification, simple, inexpensive, and reliable ceramic manufacturing technologies are needed. ...

ceramic ultrafiltration membranes are considered as an alternative for the treatment of both stable water-in-oil and oil-in-water emulsions proved to be more effective in comparison with other conventional techniques. in this study, symmetric macro-porous ceramic membranes are prepared through dry pressing of α-alumina powder and the addition of various binders including poly (vinyl alcohol). t...

AlxCoCrFeMnNi high-entropy alloys with different aluminum concentrations (x = 0.5, 1, and 1.5 at%) were synthesized by mechanical alloying followed consolidation using two sintering methods, conventional (CS) high-frequency induction heat + (HFIHS CS). The results show the presence of FCC, BCC, B2ordered phases in all systems, regardless method. BCC phase exhibits morphological changes (cuboida...

synthesized using the conventional solid-state reaction method at 1350–1550°C in air in order to investigate the effect of dopants on sintering, crystal structure, chemical stability under CO2 and H2S, and electrical transport properties. The formation of the single-phase perovskite-type structure with an orthorhombic space group Imam was confirmed by Rietveld refinement using powder X-ray diff...

Flash sintering is a novel technique that allows obtaining high-density ceramics at low temperatures and short dwell times, thus providing an energy-efficient alternative to conventional sintering. The microstructure of...

Lead free potassium sodium niobate (KNN) piezoceramics were synthesized via conventional solid state sintering route. Nano and micron WO3 were separately added to KNN through ball-milling. Dielectric and piezoelectric properties of samples sintered in the temperature range of 1110°-1145°C were measured by precision LCR-meter and APC d33-meter devices. The results revealed that micron WO3 partic...

In this study, WC–20 wt.% equiatomic (Fe,Co) powder mixture was milled in a planetary ball mill. The effects of different milling time (15 min, 5h, 10h, and 25 h) and sintering temperatures on the microstructure and mechanical properties of this equi-Fe substituted cermet were investigated. The structural evolution and the crystallite size changes of the powders during milling were monitored by...