The high temperature and high pressure supersonic jet is one of the key problems in the design of solid rocket motors. To reduce the jet temperature and noise, cooling water is typically injected into the exhaust plume. Numerical simulations for the gas-liquid multiphase flow field with mixture multiphase model were developed and a series of experiments were carried out. By introducing the ener...

This study used the commercial CFD software ANSYS CFD / Fluent, for simulating the transient flow field and investigating the radiator heat effects of radiator for single piezoelectric fan in a single rectangular flow channel, respectively, for two kinds of heat devices, which were flat and square columnar types placed horizontally or vertically in order to find the optimum cooling radiator pos...

In this paper hydrographic observations made over a fringing coral reef at the northern end of the Gulf of Aqaba near Eilat, Israel, are discussed. These data show exchange flows driven by the onshore–offshore temperature gradients that develop because shallow regions near shore experience larger temperature changes than do deeper regions offshore when subjected to the same rate of heating or c...

We examine recent developments in the cluster cooling flow scenario following recent observations by Chandra and XMM-Newton. We show that the distribution of gas emissivity verses temperature determined by XMM-Newton gratings observations demonstrates that the central gas, i.e., where the cooling time is less than the age of the cluster, in cooling flow clusters cannot be in simple steady-state...

The present paper describes the designing of a thermally and economically optimum mechanical draft counter-flow wet cooling tower. The design model allows the use of a variety of packing materials in the cooling tower toward optimizing heat transfer. Once the optimum packing type is chosen, a compact cooling tower with low fan power consumption is modelled within the known design variables....

Heat removal problem has been a bane of three dimensional integrated circuits (3DICs). Comparing with other passive cooling techniques, microfluidic cooling appears to be an ideal cooling solution due to its high thermal conductivity and scalability. Without regarding to the fact of non-uniform power distribution of integrated circuits, existing microfluidic cooling with uniform cooling effort ...

complex heat transfer phenomena (including unsteady state conduction, convection and solidification processes) occur in steel belt conveyer sulfur granulating method. numerical simulation of this technique is performed via a comprehensive and multifaceted one dimensional model. since the air situated between the adjacent sulfur pastilles is essentially stagnant, therefore, the surface temperatu...

We propose that the outer portions of cooling flows in clusters of galaxies are frequently disrupted by radio jets, and that their effective ages are much shorter than the cluster ages. The inner regions, where the gas density is higher, are more difficult to disrupt, and may continue to harbor cooling flows even after disruption events. The main assumption of the proposed scenario is that, on ...

An experimental study of hydrodynamics of film cooling is performed by using a single longitudinal slot on a cylindrical model simulated to the leading edge of the gas turbine blade. The model is set up into the test section of an open-circuit induced flow wind tunnel which provides the main flow. The injected air, as a secondary film flow, produced from a high pressure compressor is considered...

a thermodynamic analysis of the counter flow wet cooling tower (cwct) in the steelmaking unit of the khuzestan steel company (ksc) is performed in this paper. we evaluated both energy and exergy formulations for analyzing the heat and mass transfer, exergy and second-law efficiency in this cooling tower. the lewis factor le f is an indication of the relative rates of heat and mass transfer in a...