Some exploratory work on creep and inverse creep in nylon 6 monofilament, polyester multifilament yarn and wool and cotton spun yarns has been presented. It is observed that the extent of creep and inverse creep differs from material to material and depends on the initial stress. Cotton shows minimum inverse creep while nylon shows maximum inverse creep. Wool and polyester have intermediate inv...

The 60 min creep data from National Type Evaluation Procedure (NTEP) tests performed at the National Institute of Standards and Technology (NIST) on 65 load cells have been analyzed in order to compare their creep and creep recovery responses, and to compare the 60 min creep with creep over shorter time periods. To facilitate this comparison the data were fitted to a multiple-term exponential e...

Carefully designed indentation creep experiments and detailed finite-element computations were carried out in order to establish a robust and systematic method to extract creep properties accurately during indentation creep tests. Samples made from an Al–5.3mol%Mg solid-solution alloy were tested at temperatures ranging from 573 to 773K. Finite-element simulations confirmed that, for a power-la...

In order to investigate the effect of applied stress on mechanical properties in metallic glasses, nanoindentation tests were conducted on elastically bent Zr-Cu-Ag-Al metallic glasses with two different structure states. From spherical P-h curves, elastic modulus was found to be independent on applied stress. Hardness decreased by ~8% and ~14% with the application of 1.5% tensile strain for as...

At the microand nanoscale, the standard continuity boundary conditions at fluid–solid interfaces of classical transport phenomena do not apply and must be replaced by boundary conditions that allow discontinuities. In this study, the classical thermal laminar boundary layer equations are studied using Lie symmetries with the no-slip boundary condition for tangential velocity and continuous temp...

Nanoindentation has recently gained attention as a characterization technique for mechanical properties of biological tissues, such as bone, on the sub-micron level. However, optimal methods to characterize viscoelastic properties of bones are yet to be established. This study aimed to compare the time-dependent viscoelastic properties of bone tissue obtained with different nanoindentation meth...

S U M M A R Y We use idealized subduction megathrust models to examine aseismic, frictional fault creep throughout the interseismic period. We consider rate-dependent and rateand state-dependent friction. When there is significant post-seismic creep surrounding locations of coseismic slip, the creep rates surrounding an asperity may be lower than the plate convergence rate late in the seismic c...

In the present paper, time dependent creep behavior of hollow circular rotating cylinders made of exponentially graded material (EGM) is investigated. Loading is composed of an internal pressure, a distributed temperature field due to steady state heat conduction with convective boundary condition and a centrifugal body force. All the material properties are assumed to be exponentially graded a...

Creep phenomenon in rock engineering plays a key role in development of underground spaces as they must be stable enough for a long period of time. Current research involved designing and manufacturing of a new creep testing machine. The equipment is capable to perform simultaneous light-duty creep tests on more than one cylindrical rock samples at a very low cost.To evaluate the equipment’s pe...

The study of the creep properties soils is great importance for management future settlements and safe use buildings. However, starting from micro level an effective way to explore mechanism soft soil. In this paper, influence mineral composition content on structure soil was analyzed at microscopic energy scale method proposed. Then, used analyze discuss results direct shear test. discussion s...