This research work describes an intelligent and modular architecture for controlling the milling process. For this purpose, it is taking into account the admissible input cutting parameters given by the stability lobes and restrictions of the system, calculating the quasi-optimal cutting parameters. The quasi-optimal cutting parameters are obtained considering a cost function with multi-objecti...

Abrasive waterjet cutting is one of the nontraditional machining processes capable of cutting wide range of hard-to-cut materials. This process incurs relatively higher initial investment, maintenance and operating costs. Therefore optimum choice of the process parameters is essential for the economic, efficient and effective utilization of this process. This paper assesses the influence of pro...

The optimized cutting parameters are very important to control the required surface quality. In the present study, Taguchi method is used to find the optimal cutting parameters for surface roughness (Ra) in turning. The L-18 orthogonal array, the signal-to-noise ratio & analysis of variance are employed to study the performance characteristics in turning operations of AISI-410 steel bars using ...

Surface roughness is a factor of great importance in the evaluation of cutting performance and it plays an important role in manufacturing processes. Performance parameters such as cutting force, cutting temperature, vibration etc. can be used to predict surface roughness. It is expected that more accurate prediction would be possible if these factors are considered collectively with cutting pa...

In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...

This paper contains investigations on the behavior of five artificial rocklike materials subjected to abrasive water jet cutting. The influence of the test parameters, i.e. applied pump pressure, traverse rate and abrasive mass flow rate was investigated, as well as the influence of several material parameters, e.g. compressive strength, Young's modulus, absorbed fracture energy and crack veloc...

Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

This paper describes a comparison of tool life between ceramics and cubic boron nitride (CBN) cutting tools when machining hardened steels using the Taguchi method. An orthogonal design, signal-to-noise ratio (S/N) and analysis of variance (ANOVA) were employed to determine the effective cutting parameters on the tool life. The results indicated that the V was found to be a dominant factor on t...

Cutting parameters play an essential role in the economics of machining. In this paper, particle swarm optimization (PSO), a novel optimization algorithm for cutting parameters optimization (CPO), was discussed comprehensively. First, the fundamental principle of PSO was introduced; then, the algorithm for PSO application in cutting parameters optimization was developed; thirdly, cutting experi...

ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...