نتایج جستجو برای: drying effective efficiency

تعداد نتایج: 1058855  

Journal: :journal of agricultural science and technology 2011
sh. gorjian t. tavakkoli hashjin m. h. khoshtaghaza a. m. nikbakht

the objective of this study was to investigate dehydration kinetics of barberry (berberis vulgaris l.) at different drying temperatures (60 ºc, 70 ºc, 80 ºc), air velocities (0.3 m s-1, 0.5 m s-1, 1 m s-1) with two types of pretreatment. drying time and colour quality during dehydration were experimentally determined. barberries were dried from the initial moisture content of 73.44% (w.b.) to t...

2003
K. J. Chua S. K. Chou

Low-cost drying technologies suitable for rural farming areas are presented. Some of the important considerations with regard to their suitability include: 1. Low initial capital; 2. easy-to-operate with no complicated electronic/ mechanical protocol, and 3. effective in promoting better drying kinetics. The drying technologies that were selected include fluidized bed, spouted bed, infrared, so...

In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...

2013
Zhengbin He Fei Yang Yiqing Peng Songlin Yi

Ultrasonic energy was applied to assist the wood vacuum drying process. At a drying temperature of 60°C, the absolute pressure was either 0.05 MPa or 0.08 MPa; the ultrasonic power and frequency were 100 W and 28 kHz, respectively. The results showed that the effective water diffusivity of the specimens dried by the ultrasonic assisted vacuum drying at 0.05 MPa or 0.08 MPa were higher than that...

2012
Zhifeng Xiao Fan Zhang NanXing Wu Xiangdong Liu

An unsteady mathematical model of superheated steam fluidized bed drying process is established based on the transport process principles and computational fluid dynamics (CFD) method. The vapor-solid two-phase turbulent flow in the drying chamber is described with the Eulerian-Eulerian multiphase model. The model is solved by computer numerical simulation. The drying experiments of wet rapesee...

ژورنال: علوم آب و خاک 2010
بابازاده, حسین, سرائی تبریزی, مهدی, مدرس ثانوی, سید علی محمد , پارسی نژاد, مسعود ,

Deficit irrigation is one of the irrigation management methods that is used to increase Water Use Efficiency. Considering the internal plant adaptability characteristic to water shortage, Partial Root Drying method has been introduced in recent years. In this field research improvement of Water Use Efficiency for Soybean was determined. This experiment which was conducted at four furrow irrigat...

Journal: :journal of agricultural science and technology 2013
d. chen m. li x. zhu

the objective of this research was to study the drying characteristics of powderedagricultural residues. drying experiments of wheat straw (triticum aestivum) wereconducted at four temperatures of 50, 60, 70, and 80°c by a thermogravimetric analyzer.drying temperature had a significant effect on the moisture change and drying time.there was no constant drying rate period, but a short rising rat...

Journal: :International Journal for Research in Applied Science and Engineering Technology 2019

2005
Henrik Holmberg Pekka Ahtila

The calculation of heat consumption is based on the First Law and it gives quantitative information about the energy used in drying. However, it does not pay any attention to the quality of the energy used in drying. To take into account the quality of the energy, attention must be paid to the Second Law, too. Especially in those cases where the energy used in drying may be converted to mechani...

2018
Süleyman Korkut Nusret As Ümit Büyüksarı

Turkish hazel (Corylus colurna) lumber with a nominal thickness of 5 cm from the Kastamonu region, Turkey, was dried through conventional kiln drying using two different programs, a nonprotective drying schedule and a protective drying schedule. The goal of the study was to obtain a kiln schedule that would maintain wood quality and also save drying time until a final moisture content of 8 ± 2%...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید