نتایج جستجو برای: dynamic continuous recrystallization

تعداد نتایج: 655965  

In this paper, plastic flow behavior and micro structural evolution of Ti-6Al-4V alloy in temperature range of 750-1050 °C and strain rate range of 0.001-0.1 (S-1) in isotherm compression condition were investigated. The purpose was to estimate activation energy of globularization of lamellar structure and analyze this process kinetically. True Stress-strain curves obtained at the temperat...

2006
Amy C. Barr

Introduction: Ice grain size controls the geodynamic evolution of the ice I shells of large to mid-sized icy satellites. Grain size controls the viscosity of ice [1,2], and thus, the heat flux from the outer ice I shell by controlling the likelihood and efficiency of convection. In addition, the rheology of ice controls the depth to the brittle/ductile transition, which is a key control on endo...

Journal: :international journal of iron & steel society of iran 2006
a. shokuhfar s. m. abbasi n. ehseni

dynamic recrystallization, drx, behaviour of a precipitation hardened, ph, stainless steel was studied in connection with microstructural developments in a compression test. the experimental results showed that the dominant mechanism of softening is drx, but at high strain rates and low temperatures, ie, high zener-holman parameter, z, work hardening and dynamic recovery, drv, produced a pancke...

Ashrafizadeh, F., Cavaliere, P., Sadeghi, B., Shamanian, M.,

Solid state joining of powder metallurgy (P/M) processed and sintered by spark plasma sintering through friction stir welding (FSW) was studied. The nanocomposites were prepared via mechanical milling followed by spark plasma sintering. The microstructural and mechanical of the joints were evaluated as a function of the different processing parameters such as rotating and advancing speeds of th...

In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...

2017
Jianlei Yang Xueyan Jiao Wenzhen Chen Wencong Zhang Guofeng Wang

The present work introduces a novel extrusion with filler material to produce the high-performance TiBw/Ti-6Al-4V composite tube with a quasi-continuous reinforced structure. A simulation was adopted to study the effect of the filler material on the shape accuracy of the tubes. Based on the simulation results, the flow stress of the filler material was not the important factor, but the friction...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید