In this paper we address the issue of a creeping wave by investigating a twodimensional configuration which involves a surface-braking crack in a traction free planar backwall. We assume that this back-wall is irradiated by a shear Gaussian beam which is incident at a critical angle and hits the wall away from the crack edge. We show that the generated wave known in the engineering literature a...

An observed minimum in the critical crack initiation load at Poisson’s ratio (ν) of 0.21–0.22 in Na2O–TiO2–SiO2 glasses was investigated. Vickers indentation was used to examine hardness and average cracking length, fracture toughness was measured through the single-edge pre-cracked beam method, and volumes of densification and shear flow around indents were measured using atomic force microsco...

This paper presents a new incremental formulation for predicting the curved growth paths of twodimensional fatigue cracks. The displacement and traction boundary integral equations (BIEs) are employed to calculate responses of a linear elastic cracked body. The Paris law and the principle of local symmetry are adopted for defining the growth rate and direction of a fatigue crack, respectively. ...

On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...

The chipping process in a brittle material subjected to a uniformly applied edge load has been investigated. The present analysis extends earlier work by recognizing that as the chip is formed it may bend and change the loading at the crack tip. This geometry change introduces a nonlinear effect and has significant influence on the phenomenon. The nonlinear effect was demonstrated by incorporat...

Compositionally graded glass-filled epoxy sheets with edge cracks initially along the gradient are studied under dynamic loading conditions. Specimens with monotonically varying volume fraction of reinforcement are subjected to mixed-mode loading by eccentric impact relative to the crack plane. The optical method of Coherent Gradient Sensing and high-speed photography are used to map transient ...

In this work we describe a series of impact experiments performed on PMMA/4340 steel edge cracked bimaterial plates. Specimens were impacted at 20 m SK’ in a one point bend configuration using a high speed gas gun. Dynamic interfacial crack propagation was observed using the optical method of Coherent Gradient Sensing and high speed photography. Very high crack tip accelerations (IO’ m SF’) and...

Abstract. Eddy current testing using a pickup coil is usually applied to the surface detection of cracks because of its high frequency. However, for metal infrastructure, detection of not only the surface but also internal cracks is desired. Therefore, we have developed a low-frequency eddy current testing system to inspect interior structures using a magneto-resistive (MR) sensor with a wide m...

In this paper, the thermo-mechanical reliability of Cu/ultra low-k interconnects under chip to package interaction was investigated using finite element modeling and modified edge liftoff test (MELT). The crack propagation behavior in the low-k interconnect was simulated based on the crack tip opening displacement method (CTOD) and the maximum hoop stress criterion. In a six-level Cu/low-k inte...

The diffraction of SH waves by a finite plane crack is studied. The classical Sommerfeld solution for a semi-infinite straight reflecting screen is used as a building block to calculate the diffracted field generated by a finite crack. The solution is derived from the analysis of the behaviour of diffracted waves. These waves, which are first generated at the edges of the crack, travel along th...