Firstly, chitin was modified via ring-opening reaction with maleic anhydride in lithium chloride/ N,N-dimethylacetamide. Then, both chitin and chitin modified with maleic anhydride (CMA) were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) method, ultraviolet-visible (UV-Vis) spectroscopy, and scanning electron microscopy (SEM). Thermogravimetric analysi...

OBJECTIVES The purpose of our study was to estimate skin structure and conductivity distribution in a cross section of local tissue using non-invasive measurement of impedance data. The present study was designed to evaluate the efficiency of skin depth information through computer simulations. The multilayer tissue model was composed of epidermis, dermis tissues, and subcutaneous. METHODS In...

The solubility, pH, electrical conductivity, and radiopacity of AH Plus and MTA FillApex were evaluated. In addition, the surfaces morphologies of the sealers were analyzed by using scanning electron microscopy. For pH test, the samples were immersed in distilled water at different periods of time. The same solution was used for electrical conductivity measurement. The solubility and radiopacit...

The dielectric properties and ionic conductivity of novel "ceramic state" polymer electrolytes for high capacity lithium battery are characterized by Radio frequency and Microwave methods in two broad frequency ranges from 50 Hz to 20 KHz and 4 GHz to 40 GHz. This innovative solid polymer electrolyte which is highly ionic conductive (10 S/cm at room temperature) from -40C to +150C can be used i...

ABSTRACT Surface water samples (river and lake) were collected from the Revelva catchment every summer from 2010 to 2013. This study concerns importance of the use of some analytical techniques for pollutants and parameters determination in Arctic environmental samples based on the example of total organic carbon, phenols, and formaldehyde determination and measurement of pH and electrical cond...

The compounds, lanthanium chromite, lanthanium magnetite and lanthanium ferric oxide were prepared through sol-gel methods in powdered form, then calcinated, peletized, and sintered at various temperatures. Electrical conductivity of these compounds was measured at various temperatures. The effectiveness of strontium as a dopant on electrical conductivity was also investigated. Electrical condu...

0

soil temperature is one of the most effective parameters for plant growth. although the spatiotemporal monitoring of soil temperature is important for providing an optimum condition to maximize the yield efficiency, indirect measurements for zoning  of soil temperature are essential due to difficulties in direct methods of measuring it and also the limited measurement points. thus, the efficien...

In the present  paper Electrical Conductivity (EC) of Colloidal Gas Aphron (CGA) suspensions was measured for anionic and cationic surfactants (Sodium Dodecyl Sulfate (SDS) and Tetradecyl Trimethyl Ammonium Bromide (TTAB)). Experiments were made for different concentrations of SDS (6, 8.1, 10 mM) and TTAB (2, 3.51, 5 mM). CGA drainage behavior was observed and measured using 1 liter measuri...