In acute toxicity (96 hr) experiment the fingerlings of freshwater fish Labeo rohita was exposed to tannery, electroplating and textile mill effluents. The LC0 and LC50 concentrations were 15% and 20% for tannery effluents, 3% and 6% for electroplating effluents and 18% and 22% for textile mill effluents respectively. It was found that, electroplating effluent was more toxic than tannery and te...

The objectives of the research were to evaluate a magnetite-based adsorption process as an alternative treatment technique for removing metals from industrial wastewaters. A composite adsorbent was prepared b precipitating sorption, magnetic separation, and desorption process to recover Cr or Zn from solution The process was effective, but performance decreased when the adsorbent was recycled. ...

To solve the environment pollution problem by toxic heavy metal contamination resulting from human technological activities has for long presented a challenge. Electroplating industries poses a major contribution to heavy metal pollution to environment. Since the process of biosorption has many attractive features compared to the conventional effluent treatment methods in electroplating industr...

This paper deals with thermal drying of wastewater sludges, whose management will become crucial in the forthcoming years. Sludges collected after mechanical dewatering in 5 different WWTPs are submitted to the same convective drying treatment in order to try finding some relations between the drying behaviours, the type of effluent and wastewater treatments. Results show dearly sludge drying r...

~sing of the environment, the electroplating industry is likely to be one of the industries to be affected by the introduction of the water pollution control legislation in Hong Kong. The effect may be even more pronounced for the operators of small and medium-sized electroplating factories since they are unlikely to have any expertise in pollution control and will therefore require outside tec...

Fused Deposition Modeling (FDM) is a kind of Rapid prototyping (RP) technique, which allows direct transformation of CAD files into physical models. This paper attempts to identify and study the influence of electroplating layer thickness on the mechanical strength of Acrylonitrile butadiene styrene (ABS) samples developed from the FDM process. The study is conducted on the tensile test samples...

The use of lithography and electroplating to fabricate variable-reluctance, nearly planar, integrated minimotors with 6-mm-diameter rotors on silicon wafers is described. The motors consist of six electroplated Permalloy@ horseshoe-shaped cores that surround the rotor. Copper coils are formed around each core. The Permalloy and copper electroplating baths, electroplating seed layers, and throug...

Water is prime requirement for surviving of any living beings.  The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sour...