Moment resisting frames as one of the conventional lateral load resisting systems in buildings suffer from some limitations including code limitations on minimum span-to-depth ratio to ensure the formation of plastic hinges with adequate length at beam ends. According to seismic codes, in ordinary steel moment resisting frames the minimum span-to-depth ratios should be limited to 5 and in speci...

Seismic design may require non-conventional concept, due to the fact that the stiffness and layout of the structure have a great effect on the overall structural behaviour, on the seismic load intensity as well as on the internal force distribution. To find an economical and optimal structural configuration the key issue is the optimal design of the lateral load resisting system. This paper foc...

Progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. Both General Services Administration (GSA) and United States Department of D...

Physics based collapse simulations of moment resisting steel frame buildings are presented with an emphasis on the development of energy flow relationships. It is proposed that energy flow during progressive collapse can be used in evaluation of moment resisting, steel frame building behavior and specifically, localized failure. If a collapsing structure is capable of attaining a stable energy ...

conventional methods for seismic design of structures are based on building capacity. because of the disadvantages of conventional methods, base isolation system  is known as an effective solution to protect structures against earthquakes. in this study the operation of 2-storey steel frame with and without seismic isolators under near-fault earthquake of chichi، northridge and  capemendocine  ...

The fundamental periods of buildings are essential to calculate the design base shear and lateral forces. Most seismic codes specify empirical formulae to estimate the fundamental vibration period of buildings. These empirical formulae are used for both lowand mediumrise buildings. These formulae depend on the building materials (steel, reinforced concrete etc), building types (frame, shear wal...

This paper presents a simplified approach for the design of semi-continuous composite beams in braced frames, where specific attention is given to the effect of joint rotational stiffness. A simple composite beam model is proposed incorporating the effects of semi-rigid end connections and the non-prismatic properties of a 'cracked' steel-concrete beam. This beam model is extended to a sub-fram...