Hydrogen is seen as one of the important energy carriers of the future with potential to reduce local as well as global warming. The main by-product of the combustion of hydrogen in air is water vapor and trace quantities of oxides of nitrogen. An experiment was conducted to study the impact of hydrogen/natural gas blends on performance, thermodynamic efficiency and exhaust gas emissions in ...

In this paper, fatigue strength of the engine damper cap screw bolt is determined. Engine damper cap screw is critical fastener. Critical fastener is a term used to describe a cap screw that, upon failure, causes immediate engine shutdown or possible harm to person. So, determination of fatigue strength is important. S-N method is used for cap screw fatigue strength determination by testing num...

operating an engine with homogeneous charge compression ignition (hcci) technique is a promising technique to lower nox and pm emissions of engines while achieving high efficiency and lower fuel consumption. nevertheless, applications for hcci are still limited due to the absence of a definite means to control ignition timing and narrow operating region. a single cylinder diesel engine with com...

The paper shows a test results of single cylinder, direct injected, self ignited dual fuel engine. One has analysed a combustion parameters calculated on base of recorded indicator diagrams. The comparison included: the ignition delay period, the cylinder pressure, the rate of pressure rise, the average medium temperature, the heat release rate, the total combustion time and the indicated effic...

In recent years, concerns over the impact of internal combustion engine hydrocarbon emissions on the environment have prompted tighter regulation on allowable emission levels. While much work has been done on reducing hydrocarbon emissions after they have entered the exhaust stream, less direct monitoring of the emission sources has been performed. An optically accessible four-stroke internal c...

investigations are carried out to evaluate the performance of a low heat rejection (lhr) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown and air gap insulated liner with superni insert with different operating conditions of crude jatropha oil with varied injection timing and injection pressure.  performance parameters of brake ther...

A transport equation residual model incorporating a Damkohler criterion has been developed and implemented in the ERC KIVA-3V code for Gasoline Direct Injection (GDI) engine simulations for better predictions of flame propagation. In the transport equation residual model a fictitious species concept is introduced to account for the residual gases in the cylinder, which have a great effect on th...

Small stationary diesel engines, like in generator sets, have limited emission control measures and are therefore responsible for 44% of the particulate matter (PM) emissions in the United States. The diesel exhaust composition depends on operating conditions of the combustion engine. Furthermore, the measurements are influenced by the used sampling method. This study examines the effect of eng...

This study characterizes the size distribution and composition of metals in diesel exhaust particulates (DEPs) emitting from four driving conditions. We quantified 17 metals in DEPs (34-1000 nm) with a total concentration ranging from 5.4-7.0 microg/m(3). Depending on driving conditions, ultrafine (<100 nm) and accumulation-mode DEPs carried up to 41% and 75% of the quantified metals, respectiv...

The Organic Rankine Cycle (ORC) has been proved a promising technique to exploit waste heat from Internal Combustion Engines (ICEs). Waste heat recovery systems have usually been designed based on engine rated working conditions, while engines often operate under part load conditions. Hence, it is quite important to analyze the off-design performance of ORC systems under different engine loads....