In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...

obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at mobarakeh steel company. the effects of different parameters including the heat resu...

Project Overview Interrupted-fin surfaces are used to enhance the air-side heat transfer performance in many compact heat exchangers. While many empirical correlations are available in the open literature for offset-strip and louvered-fin geometries, local heat transfer behavior on individual fins is not as well understood. A redesign of these surfaces may result in higher heat transfer. Inlet ...

The effect of alumina nanoparticles on the heat transfer performance of an oscillating heat pipe (OHP) was investigated experimentally. A binary mixture of ethylene glycol (EG) and deionized water (50/50 by volume) was used as the base fluid for the OHP. Four types of nanoparticles with shapes of platelet, blade, cylinder, and brick were studied, respectively. Experimental results show that the...

Experimental study of flow boiling heat transfer in a microchannel array consisting of main channels connected to two auxiliary channels (each) was conducted. A microbubble-excited actuation mechanism, powered by high frequency vapor bubble growth and collapse, was established to create and sustain strong mixing in the microchannels. It was shown to significantly enhance flow boiling heat trans...

In this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(V/V) percent of the reports. The overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. an efficient approach to studying cooling system for diesel engine is a 3d computational fluid dynami...

bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. high mixing that result in high heat and mass transfer rates are amongst their advantages. heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...

the use of solar collectors in combination with heat pipes is rapidly growing in recent years.heat pipes, as heat transfer components, have undeniable advantages in comparison with other alternatives. the most important advantage is their high rate of heat transfer at minor temperature differences. although there have been numerous studies on the heat analysis or first thermodynamic analysis of...

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...