In this article we introduce and compare three techniques for low-cost and rapid bonding of stereolithographically structured epoxy components to polydimethylsiloxane (PDMS). In short, we first create a polysiloxane layer on the epoxy surface via silane surface coupling and polymerization. Afterwards, the modified epoxy surface can be bonded to a PDMS component at room temperature using a handh...

Reducing the flammability of polymeric materials is a serious problem that needs to be solved. The paper presents results study effect iron nanopowders, used as filler, on epoxy polymers. Epoxy composites filled with 5 wt. % nanopowder and 10 boric acid separately, well in combination were prepared. prepared samples was evaluated by determining ignition temperature time-to-ignition.

A novel method for the direct fabrication of arrays of micropatterned polymeric and carbon nanofiber structures on any substrate is developed. First SU-8, an epoxy-based negative photoresist, is electrospun under optimized conditions to produce a layer of polymeric nanofibers. Next, this nanofibrous mat is micropatterned using photolithography, and finally, pyrolysis produces ordered arrays of ...

      In order to prepare polyurethane elastomers with acceptable physical properties and good biocompatibility, novel polyurethane networks were synthesized via curing reaction of epoxy-terminated polyurethane prepolymers (EUPs) with hexamethylene diamine. EUPs were prepared from reaction of glycidol with NCO-terminated polyurethanes (ITPs). ITPs were also synthesized from reaction of one equi...

in order to prepare polyurethane elastomers with acceptable physical properties and good biocompatibility, novel polyurethane networks were synthesized via curing reaction of epoxy-terminated polyurethane prepolymers (eups) with hexamethylene diamine. eups were prepared from reaction of glycidol with nco-terminated polyurethanes (itps). itps were also synthesized from reaction of one equivalent...

Low cost composite materials are widely used in civil and structural engineering applications. This project uses EPON to plasticize a commonly used resin, epoxy resin to lower the cost of the composite and to find out the mechanical and thermal properties of the plasticized epoxy resin to see if it is suitable for the said applications. Three point bending tests were carried out to evaluate the...

A brief description of the potential occupational health hazards encountered in the manufacture of plastics (polymers) is given. In general, these hazards are due to the monomers used to make the various plastics, to unreacted monomer contained within the finished products, and to the fillers, stabilizers, pigments, inhibitors, and initiators used in fabricating the finished products. They run ...