Exhaust gases from internal combustion engines are the main source of urban air pollution. Quantification of Polycyclic aromatic hydrocarbons (PAHs) in the exhaust gases is needed for emissions monitoring, enforcement, development, and testing of control technologies. The objective was to develop quantification of gaseous naphthalene in diesel engine exhaust based on diffusion-controlled extrac...

In this paper, model predictive control (MPC) strategy is implemented to a GE9001E gas turbine power plant. A linear model is developed for the gas turbine using conventional mathematical models and ARX identification procedure. Also a process control model is identified for system outputs prediction. The controller is designed in order to adjust the exhaust gas temperature and the rotor speed ...

A silencer to attenuate engine exhaust noise using active control methods is developed. The device consists of an electrically driven valve, combined with a buffer volume, which is connected to the exhaust outlet. Using the mean flow through the valve and the pressure fluctuations in the volume, the valve regulates the flow in such a way that only the mean flow passes through the exhaust outlet...

A novel plasma-driven catalysis (PDC) reactor with special structure was proposed to remove vehicle exhaust gas. The PDC reactor which consisted of three quartz tubes and two copper electrodes was a coaxial dielectric barrier discharge (DBD) reactor. The inner and outer electrodes firmly surrounded the outer surface of the corresponding dielectric barrier layer in a spiral way, respectively. Na...

An experimental study of the oxidation of CO in exhaust gas from a motorcycle has been carried out using plasma chemical reactions in a pulsed corona discharge. In the process, some main parameters, such as the initial CO concentration, amplitude and frequency of pulses, residence time, reactor volume, and relative humidity (RH), as well as their effects on CO removal characteristics, were inve...

Abstract: The compressed air energy storage (CAES) system, considered as one method for peaking shaving and load-levelling of the electricity system, has excellent characteristics of energy storage and utilization. However, due to the waste heat existing in compressed air during the charge stage and exhaust gas during the discharge stage, the efficient operation of the conventional CAES system ...

In-cylinder exhaust gas recirculation (EGR) stratification, generally achieved by supplying EGR asymmetrically into intake ports on a four-valve diesel engine, is sensitive to trapped exhaust gas in the intake manifold and intake ports that is caused by the continuous supply of EGR during the valve-close periods of the intake valves. The subject of this study is to evaluate the distribution of ...

In this paper, the 2f/1f tunable diode laser wavelength modulation spectroscopy is used for the simultaneous measurement of concentration and temperature of CO2 in the exhaust plume of an aero engine. The suitability of the R48 spectral feature of CO2 at 1997.2 nm is discussed for this project and for further application of CO2 tomographic imaging on large-scale aero-engines. To ensure accurate...