In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...

The traditional Taguchi method is widely used for optimizing the process parameters of a single response problem. Optimization of a single response results the non-optimum values for remaining. But, the performance of a machining process is often evaluated by several quality responses. Under such circumstances, multi-characteristics response optimization may be the solution to optimize multi-re...

in the present paper, the study has been made to optimize the process parameters during machining of Inconnel-600 by wire electrical discharge machining (WEDM) using response surface methodology (RSM). Four input process parameters of WEDM (namely Peak Current (IP), Pulse-On time (TON), Pulse-Off time (TOFF) and Wire Feed rate (WF)) were chosen as variables to study the process performance in t...

274 Optimization of process parameter for surface finishing in abrasive flow finishing process Ravi Gupta (M.E) Asst. Prof.(Lovely Professional University) [email protected] , Abstract-Abrasive flow finishing is a non-conventional finishing process that is used for finishing of work piece which are difficult to finish by conventional method i.e. by honing, lapping and other machining operati...

Among all non-conventional micro-machining, electrochemical discharge machining (ECDM) is having high quality of material removal rate with zero residual stress. This machining has been accepted as a highly modern technology in micromachining. In this paper an effort has been done on micro drilling of glass using electrochemical discharge machining (ECDM). A fixed tool and a step down transform...

The challenge of current manufacturing industries is increase production rate in order to maintain their competitiveness in market.This paper investigates the effect of spindle speed and feed on material removal rate in turning operation execute on conventional lathe machine. An effort has been made to model the one response variable using Taguchi and ANOVA method. Taguchi L9 orthogonal array i...

Conductive ceramics like cobalt bonded tungsten carbide which is categorized as with high mechanical and physical properties are usually known to create major challenges during conventional and non-conventional machining. Electrical discharge machining (EDM) which is very prominent amongst the non-conventional machining methods is expected to be used quite extensively in machining it due to the...

In this paper, an investigation of the load-dependent wear behavior copper-free semi-metallic brake material is presented. The experiments were conducted in ambient thermal settings with varying sliding velocities (3.141 m/s, 2.09 and 1.047 m/s), normal load (60 N, 50 40 N), distance (4500 m, 3000 1500 m). Taguchi’s method was used designing to examine output through L9 orthogonal array. ANOVA ...

This paper presents the optimization of high speed milling process parameters with respect to the surface roughness of samples and the study of the Taguchi design application to surface quality in a CNC end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized given various control factors using fewer resources than...