This paper focuses on the computer cooling capacity using the thermosyphon loop with minichannels and minipump. The one-dimensional separate model of two-phase flow and heat transfer in a closed thermosyphon loop with minichannels and minipump has been used in calculations. The latest correlations for minichannels available in literature have been applied. This model is based on mass, momentum,...

An experimental investigation of the performance of thermosyphons charged with water as well as the dielectric heat transfer liquids FC-84, FC-77 and FC-3283 has been carried out. The copper thermosyphon was 200 mm long with an inner diameter of 6 mm, which can be considered quite small compared with the vast majority of thermosyphons reported in the open literature. The evaporator length was 4...

ing characteristics could be investigated. Finally the pilot plant A single tube plant Kestner evaporator'was set up at was run under 1st effect conditions in order that a comparison Illovo to investigate heat transfer characteristics when could be made with industrial 1st effect evaporators (both simulating different evaporator Tests carried out have Roberts and Kestner). This particular trial...

In this paper, a high performance flexible component that serves as a color filter and an electrode simultaneously is suggested. The suggested highly conductive and flexible color filter electrode (CFE) has a multilayer film structure composed of silver (Ag) and tungsten trioxide (WO3). The CFE maintained its color filtering capability even when the films were bent on a polyethylene terephthala...

The industrial practice of curtain coating, used in a vast number of applications, involves a liquid film falling vertically to coat a solid surface passed underneath at high speed. This solid surface may either be dry prior to reaching the liquid film making contact or be pre-wetted by a thin liquid film, depending upon the nature of the application. Above some critical speed, dependent upon t...

We report here the fabrication of freestanding HfO2 grating by combining fast atom beam etching (FAB) of HfO2 film with dry etching of silicon substrate. HfO2 film is deposited onto silicon substrate by electron beam evaporator. The grating patterns are then defined by electron beam lithography and transferred to HfO2 film by FAB etching. The silicon substrate beneath the HfO2 grating region is...

Traditional gas fired boilers and air-source heat pumps are not efficient for heating when the outdoor temperature is low, while pump still one of most promoting measures building energy-efficient heating. In this study, a novel gas-fired absorption with vertical falling film exchangers has been proposed district Compared conventional boilers, system higher efficiency, since it can absorb from ...