This paper reports the strength behaviour of concrete containing three types of recycled polyethylene terephthalate (PET) aggregate. Results are also analysed to determine the PET-aggregate’s effect on the relationship between the flexural and splitting tensile strengths and compressive strength and to know whether the relationships between compressive strength and other strength characteristic...

The purpose of this study was to investigate the effect of modifying aluminum oxide slips with magnesium oxide (MgO) to create a jointing material for In-Ceram Alumina. Jointed In-Ceram Alumina bars with In-Ceram Alumina slips containing 0-1.0 mass% MgO were examined by a three-point bending test. Joint-free bars were also tested as controls. Fracture surfaces were evaluated by scanning electro...

Abstract: Zirconia solid electrolytes with nonequilibrium composite structure were prepared by impregnation of a porous 8YSZ matrix with a solution of Zirconia. Microstructures were characterized by XRD and SEM. The electrical properties were studied by impedance spectroscopy as a function of temperature. Biaxial flexural strength and fracture toughness of composite samples were measured by rin...

The fracture and fatigue characteristics of several cemented carbide grades are investigated as a function of their microstructure. In doing so, the influence of binder chemical nature and content (Co and 76wt%Co-24wt%Ni), as well as carbide grain size on hardness, flexural strength, fracture toughness and fatigue crack growth (FCG) behavior is evaluated. Mechanical testing is combined with a d...

This paper explores the effects of cement stabilization (5, 10, 15 and 20 wt%) on structural mechanical properties (compressive/flexural strengths fracture toughness) abandoned termite mound soil. The crystal structures crystallinity constituents were determined using X-ray diffraction (XRD), while microstructure was characterized via scanning electron microscopy (SEM) energy dispersive spectro...

The mechanical characterization of mortars is problematic due to their sensitivity to stress concentration defects, namely pores and flaws. In this paper, data on three-point bending, Young’s modulus and fracture toughness of mortar beams are presented and discussed. Here, Weibull statistics is applied to analyse flexural strength of the developed mortar. Based on data obtained according to the...

The aim of this study was to investigate the relationship between the different mechanical properties with the filler fraction of various resin composites. Mechanical properties of eighteen different resin composites were investigated in this study; flexural strength (FS), flexural modulus (FM), fracture toughness (FT), compressive strength (CS), diametral tensile strength (DTS), Barcol hardnes...

The disposal of used tires is a major environmental problem throughout the world which causes environmental hazards. Crumb rubber is a waste material that is ideal for use in concrete applications. The aim of this study is achieved to use of rubber waste as partial replacement of fine aggregate to produce rubberize concrete in M30 mix. Different partial replacements of crumb rubber (0, 5, 10, 1...

It is of critical importance to improve toughness, strength, and wear-resistance together for the development of advanced structural materials. Herein, we report on the synthesis of unoxidized graphene/alumina composite materials having enhanced toughness, strength, and wear-resistance by a low-cost and environmentally benign pressure-less-sintering process. The wear resistance of the composite...

In this study the effect of using multi-walled carbon nanotube (MWCNT) on flexural and compressive strengths, ultimate displacement and energy absorption capability of standard cement mortar considering different weight percentages of nanotubes as well as different dispersion methods has been investigated. Influential point in adding nanotubes to the composites is their proper dispersion, which...