In this paper, the effect of fluidized bed temperature on primary fragmentation of Huadian oil shale was investigated experimentally in thermal state using a small-scale fluidized bed with N2 as fluidizing gas. The fluidized-bed temperatures changed from 600 °C to 1000 °C. Experimental results indicate that the fluidized bed temperature is an important factor of primary fragmentation of oil sha...

An accurate prediction of the minimum fluidization velocity is a crucial hydrodynamic aspect of the design of fluidized bed reactors. Common approaches for the prediction of the minimum fluidization velocities of binary-solid fluidized beds are first discussed here. The data of our own careful experimental investigation involving a binary-solid pair fluidized with water is presented. The effect...

Effects of magnetic fields on improving mass transfer in flue gas desulfurization with a fluidized bed are investigated in the paper. In this research, the magnetically fluidized bed (MFB) is used as the reactor in which ferromagnetic particles are fluidized with simulated flue gas under the influence of an external magnetic field. Lime slurry is continuously sprayed into the reactor. As a cons...

Two-interconnected fluidized bed systems are widely used in various processes such as Fisher-Tropsch, hot gas desulfurization, CO2 capture-regeneration with dry sorbent, chemical-looping combustion, sorption enhanced steam methane reforming, chemical-looping hydrogen generation system, and so on. However, most of two-interconnected fluidized beds systems require riser and/or pneumatic transport...

the objective of this study was to examine the effects of the fluidized-bed drying me-thod on the final quality of two varieties of iranian rice, medium- and long grain. the re-sults were compared to that of paddy drying using a traditional method. rough rice was treated in the fluidized bed drier at 140ºc for 2 minutes. similar samples were dried for 8-10 hrs by the traditional method. dried s...

The process of fluidized bed spray granulation unites the steps of solid formation and product formulation in one apparatus and is used to produce granules out of a liquid. Thereby, a melt is atomized into small droplets and sprayed into the fluidized bed, which consists of seed particles of the same material. Droplets deposit on the particles near the spray zone and form a film which solidifie...

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrar...

The objective of this work is to show a procedure for mesh generation in a fluidized bed using large eddy simulations (LES) of a filtered two-fluid model. The experimental data were obtained by [1] in a laboratory fluidized bed. Results show that it is possible to use mesh with less cells as compared to RANS turbulence model with granular kinetic theory flow (KTGF). Also, the numerical results ...

This paper focuses on the determination of the solid circulation of a CFB gasification system with a dual fluidized bed concept and the distribution of the solid hold up at different fluidization conditions. A mathematical model of the riser was designed and implemented in a model of a dual fluidized bed system. This model contains routines for calculation of each section of the dual fluidized ...

Fluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under cond...