Steam injection has had a profound impact on the production of heavy crude oil. Steam, however, is inviscid compared to a viscous oil and is not the ideal displacement agent. Field studies and laboratory tests have shown that foaming the steam phase through the aid of a suitable surfactant in aqueous solution can achieve mobility control of injected gases and mitigate the effects of gravity ove...

OBJECTIVES To compare transmitted forces through ethylene vinyl acetate (EVA) mouthguard material and the same EVA material with gas inclusions in the form of a closed cell foam. METHOD EVA mouthguard materials with and without foam gas inclusions and 4 mm thick were impacted with a constant force from an impact pendulum. Various porosity levels in the foam materials were produced by 1%, 5%, ...

Despite the increasing interest in CO2 foam flooding for enhanced oil recovery applications, it is challenging to have a successful field operation as the performance of the surfactant is often affected by the presence of crude oil and salinity of the water. It is also challenging to dispose of huge amounts of water associated with the field operation. Due to the incompatibility of the produced...

Antibacterial foam dressing has been developed in recent years based on polymeric membranes and silver ions or nanoparticles as antibacterial components. However, have cytotoxicity to humans. Herein, we used biocompatible multi-branched gold an antimicrobial agent polyurethane wound dressings. This study described a rapid surfactant-free method for the preparation of using hydroquinone reducing...

We focus on a sequence of 9 lava fountains from Etna that occurred in 2011, separated by intervals of 5 to 10 days. Continuous measurements allowed to discover the occurrence of gravity decreases before the onset of most fountaining episodes. We propose that the gravity changes are due to the pre-fountaining accumulation of a foam layer at shallow levels in the plumbing system of the volcano. R...

The flow characteristics of aqueous foams were studied in a thin flow channel and a round pipe instrumented for pressure gradient and flow rate measurements. The quality of the foam was varied by controlling the volumetric flow rate of liquid and gas, and different flow types were identified and charted. Uniform foams move as a rigid body lubricated by water generated by breaking foam at the wa...

High-volume hydraulic fracturing (HVHF) has revolutionized the oil and gas industry worldwide but has been accompanied by highly controversial incidents of reported water contamination. For example, groundwater contamination by stray natural gas and spillage of brine and other gas drilling-related fluids is known to occur. However, contamination of shallow potable aquifers by HVHF at depth has ...

Microfluidic approaches to microbubble production are generally disadvantaged by low yield and high susceptibility to (micro)channel blockages. This paper presents an alternative method of producing microbubbles of 2.6 μm mean diameter at concentrations in excess of 30 × 10(6) mL(-1). In this method, the nitrogen gas flowing inside the liquid jet is disintegrated into spray of microbubble when ...

Diode-laser-based absorption spectroscopy for the evaluation of embedded gas concentrations in porous materials is demonstrated in measurements of molecular oxygen dispersed throughout scattering polystyrene foam, used here as a generic test material. The mean path length of light scattered in the material is determined with the temporal characteristics of the radiation transmitted through the ...

We use a rigid axisymetric microfluidic flow focusing device to produce monodisperse bubbles, dispersed in a surfactant solution. The gas volume fraction of the dispersion collected out of this device can be as large as 90%, demonstrating that foam with solid-like viscoelastic properties can be produced in this way. The polydispersity of the bubbles is so low that we observe crystallization of ...