BACKGROUND Patients treated with the Melody device (Medtronic) for percutaneous pulmonary valve implantation experience stent fractures in ≈25% of the cases. The aim of this study is to identify the risk factors associated with fracture using 3-dimensional (3D) analyses. METHODS AND RESULTS In situ 3D shape of the Melody stent was reconstructed from 42 patients using procedural biplane fluoro...

We used femoral neck structural parameters (FNSPs), calculated from bone mineral density (BMD) measurements of the femoral neck by dual X-ray absorptiometry, to discriminate osteoporotic fractures of the proximal femur in post-menopausal women. We compared 1646 women without fracture and 429 women with hip fractures, including 273 with femoral neck (FN) and 156 with trochanter (TR) fractures. T...

Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity, etc) have high un...

In this chapter some of the standard procedures for delamination testing of unidirectional polymer composites will be examined. The main objective is to explore the possibilities of applying the standard testing methods to interlayer toughened composites and to establish parameters which may influence fracture toughness measurements. Existing standards for mode I and mode II delamination testin...

Wrinkling and fracture are the important defects in deep drawing operation, which can be prevented using blank holding force (BHF) which has to be optimized as lower BHF promotes wrinkles formation and higher BHF promotes fracturing. Hence the limits of wrinkling and fracture have to be established. These limits depend on various tooling and process parameters. In this work the effect of toolin...

Mode I, quasi-static, steady state crack growth is analyzed for rate dependent materials under plane strain conditions in small scale yielding. The solid is characterized by an elastic-viscoplastic constitutive law and the plane ahead of the crack tip is embedded with a rate dependent fracture process zone. The macroscopic work of fracture of the material is computed as a function of the crack ...

The effect of prepolymerized particle fillers on fracture toughness of four commercial composite resins was studied. The ground surface morphology was examined with a field emission scanning electron microscope. Fracture toughness was determined by using single edge notched specimens. Acoustic Emission (AE), which is the elastic wave due to the release of energy from the localized sources of ma...