Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will lead to an improvement in the area of adsorption science. In this paper, we employed three isotherm models, namely: Langmuir, Freundlich, and Dubin...

Microwave stabilized heavy metal sludge was used as an adsorbent to remove the copper ions from aqueous solution. The adsorption characteristics of copper on the stabilized-sludge were studied by various models, such as Freundlich and Langmuir isotherm equation. Results show that the pH(zpc) of stabilized-sludge was at 9.2-9.5. Moreover, the adsorption of copper ions onto the stabilized-sludge ...

Adsorption removal of Cu(II) and Cd(II) from aqueous solution using low-cost banana peels (a food waste) and bentonite clay (natural resource), was investigated. The adsorption process was studied in a batch scale at mean operation parameter which were pH, adsorbent particle size, adsorbents dosages, and initial concentrations of metal ions. All experiments were conducted at room temperature. L...

in the present investigation, shells of pistachio are used as adsorbents and they have been successfully used for the removal of blue 56, from water samples. the effect of various parameters such as: ph, amounts of adsorbents, size of adsorbent particles and contact time on removal processing were investigated. in this study freundlich absorption isotherms and langmuir were investigated . the e...

Activated carbon was prepared from Enteromorpha prolifera by zinc chloride activation. The adsorption behaviors of three reactive dyes (Reactive Red 23, Reactive Blue 171 and Reactive Blue 4) onto this biomass activated carbon were investigated in batch systems. The experimental findings showed that the removal efficiencies of three dyes onto activated carbon were maximum at the initial solutio...

In this paper, the ability of coconut bunch waste (CBW), an agricultural waste available in large quantity in Malaysia, to remove basic dye (methylene blue) from aqueous solution by adsorption was studied. Batch mode experiments were conducted at 30 degrees C to study the effects of pH and initial concentration of methylene blue (MB). Equilibrium adsorption isotherms and kinetics were investiga...

The present study reports the kinetic and absorption performance of novel nanometre scale hydroxyapatite (HAP) absorber synthesised from a combined ultrasound and microwave based technique for the removal of metal ions (Fe, Cu and Zn) from aqueous solutions. After powder characterisation was carried out using XRD, SEM, EDS and FT-IR, batch adsorption studies were carried out. Kinetic studies es...

adsorption capacity of cr (vi) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, ph, temperature, agitation speed, absorbent dose and particle size. cr (vi) removal is ph dependent and found to be maximum at ph 2.0. the amounts of cr (vi) adsorbed increased with increase...

Rhizomucor tauricus, an industrial fungus, was immobilized in sodium alginate and used as adsorbent for the removal of nickel from aqueous solutions. The biosorption capacity of Ni(II) was found to be 394 mg/g of immobilized biomass. It was observed that an increase in pH from 3 to 6 increased the percent adsorption, and an increase in liquid-to-solid ratio from 2 to 10 increased the metal upta...

An investigation was conducted on the adsorption of oxymatrine (OMT) on a spherical cellulose adsorbent embedded with wattle bark tannin. The results showed that the adsorption of the OMT on the adsorbent was solution pH dependent and the adsorption process followed the Freundlich adsorption isotherm. The adsorption kinetics of the OMT on the adsorbent could be well described by the pseudo-seco...