• Ti-15Zr alloy prepared by powder metallurgy includes ? single-phase with Zr-rich stripes. The has a good combination of strength and ductility. High the is ascribed to hindrance effect Zr Good ductility attributed occurrence slip transmission across microstructures mechanical properties (wt.%) hot extrusion were investigated. comprised stripes distributed at both intra- inter-granular. tensil...

1 Associate Research Fellow,Center for Research on Earthquake Engineering (NCREE), Chinese Taiwan 2 Professor, Dept. of Civil Engineering, Taiwan University, Taipei, Chinese Taiwan 3 Assistant Professor, Dept. of Civil and Environmental Engineering, University of Kaohsiung, Kaohsiung, Chinese Taiwan Email: [email protected] ABSTRACT : Ductility is the main attribute of steel moment connections...

Poor fire resistance of fibre-reinforced polymer (FRP) restricts its further application in construction structures. In this paper, a novel fibre-reinforced cementitious matrix confined concrete column (FRCMCC) using fireproof grout as the fibre matrix was developed, and experiments were conducted to establish its performance and analyse the mechanical properties under axial compression. The te...

Rapid-solidification method was applied to make Fe-15at%Ga and Fe-17at%Ga ribbons of 100 μm thickness. These ribbons have large magnetostriction of 270 ppm, where the coercive force exhibits a maximum value. The phenomenon is related to special metallic texture, that is, the ribbon has strongly [001]-oriented textured fine columnar microstructure with grain size of 2~5 μm. The ribbon has little...

This report describes a non-linear method of analysis for prestressed concrete structures which predicts behaviour at all stages of loading, from the initial application of prestress up to and beyond the collapse condition. The method uses a segmental line element approach and is a modification of an existing method previously developed for reinforced concrete structures. Comparisons with the r...

At low temperatures, monolithic bulk metallic glasses (BMGs) exhibit high strength and large elasticity limits. On the other hand, BMGs lack overall ductility due to highly localized deformation mechanisms. Recent experimental findings suggest that the problem of catastrophic failure by shear band propagation in BMGs can be mitigated by tailoring microstructural features at different length sca...

Metals can be processed to reach ultra-high strength, but usually at a drastic loss of ductility. Here, we review recent advances in overcoming this tradeoff, by purposely deploying heterogeneous nanostructures in an otherwise single-phase metal. Several structural designs are being explored, including bimodal, harmonic, lamellar, gradient, domain-dispersed, and hierarchical nanostructures. The...