We present a two-dimensional simulation model for dopant diffusion in polysilicon, which includes dopant clustering in grain interiors as well as in grain boundaries. The grain growth model is coupled with the diffusion coefficient of the dopants and the process temperature. For all high dose implantation cases the trapping/emission mechanism in polysilicon and the grain growth are the major ef...

In the short crack regime of the fatigue process, grain boundaries in steels are barriers against crack growth. In this paper, we use: (1) a method involving crack density; and (2) a method of dimensional analysis, to evaluate the effects of grain size and grain-boundary resistance on short crack behaviour and fatigue life. The results show that the fatigue life increases with a decrease in gra...

Microwave sintering (MWS) of commercially available 15-nm-size nanocrystalline TiN powder was studied. Densification kinetics and grain growth mechanisms of nano-TiN were evaluated using non-isothermal heating up to 1500 °C with variable heating rates. A true nanocrystalline ceramic with ~80-nm-size grains and 94.5 % theoretical density was obtained via MWS consolidation at 1400 °C. At higher t...

We present the first results of the treatment of grain growth in our 3D, two-fluid (gas+dust) SPH code describing protoplanetary disks. We implement a scheme able to reproduce the variation of grain sizes caused by a variety of physical processes and test it with the analytical expression of grain growth given by Stepinski & Valageas (1997) in simulations of a typical T Tauri disk around a one ...

9 = 0.6 I / s ' 7 = 6.0 0 7 = 2 4 i ti 3 = 6 0 Through close control over green-state powder processing, pure alumina ceramics of 0.5-pm grain size were obtained by sintering at 1250°C. The static grain growth of this material was modest at temperatures below 1300°C. However, dynamic grain growth occurred rapidly during superplastic deformation. Therefore, although the ultrafine-grained alumina...

In an effort to maximize grain growth of open-die forged 6061 aluminum alloy parts, samples from three of Weber Metals’s suppliers (Hidal Co-Almex USA Inc., TST Inc., and Vista Metals Corp.; to be called Supplier H, Supplier T, Supplier V respectively) were cut into cylinders with diameters of 0.75 ̋ and heights of 2 ̋, and put through a simulated forging process and heat treatment. It is possibl...

The distribution of the characteristic texture components between the ferrite grains of different size classes has been studied in a steel with 0.082%C, 1.54% Mn, 0.35% Si, 0.055%Nb and 0.078%V after different rolling schedules with a final rolling temperature above or below Ar3. Microstructures and textures were characterized by means of optical microscopy and orientation microscopy. A strong ...

This work has two primary goals. The first is to advance our fundamental understanding of grain boundaries by making direct measurements of grain boundary thermodynamic properties using ultrafine-grained materials. The second is to explore possible deviations from conventional behavior at ultrafine grain sizes, specifically in regards to grain boundary thermodynamic properties and solute segreg...

Two different aspects of the thermal stability of grains were studied – (i) thermal stability of grain structure evolution during friction stir processing (FSP), and (ii) thermal stability of grains after FSP. It was concluded that Al3(Sc,Zr) dispersoids are effective in limiting grain growth to ultrafine grained regime (UFG) by stabilizing the microstructure during FSP. The presence of these d...

In crystalline materials, plastic deformation occurs by the motion of dislocations, and the regions between individual crystallites, called grain boundaries, act as obstacles to dislocation motion. Grain boundaries are widely envisaged to be mechanically static structures, but this report outlines an experimental investigation of stress-driven grain boundary migration manifested as grain growth...