An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS) measurements. The crystal grain size of wire brushed surface was analyzed by X-ray d...

Boundaries and junctions (both internal and external) can contribute significantly to the plastic deformation of metallic solids, especially when the average size of the grains (phases) is less than hundred nanometres or when the size of the solid itself is of the order of microns. The overall permanent deformation of the solid is a result of a coupling between bulk plasticity with moving inter...

A systematic study of crack tip interaction with grain boundaries is critical for improvement of multiscale modeling of microstructurally-sensitive fatigue crack propagation and for the computationally-assisted design of more durable materials. In this study, single, biand large-grain multi-crystal specimens of an aluminum-copper alloy are fabricated, characterized using electron backscattered ...

In this study, the underlying atomic-scale plastic deformation mechanisms responsible for crack propagation process in nanograined gold thin film with an average grain size of ~10 nm (ranging from ~2 to ~22 nm) is investigated by situ high-resolution transmission electron microscope observations (i.e., a homemade device atomic force inside microscope) and atomistic molecular dynamic simulations...

A theoretical model for describing effective thermal conductivity (ETC) of nanocrystalline materials has been proposed, so that the ETC can be easily obtained from its grain size, single crystal thermal conductivity, single crystal phonon mean free path (PMFP), and the Kaptiza thermal resistance. In addition, the relative importance between grain boundaries (GBs) and size effects on the ETC of ...

Dislocation and grain-boundary melting are studied in three dimensions using the phase field crystal method. Isolated dislocations are found to melt radially outward from their core, as the localized excess elastic energy drives a power-law divergence in the melt radius. Dislocations within low angle to intermediate angle grain boundaries melt similarly until an angle-dependent first-order wett...

Validation studies of crystal plasticity fi nite element models typically compare model predictions of strain fi elds withexperimental measurements; often ignored are the grain rotations predicted by the model. Accurate predictions ofcrystallographic rotations are necessary for trustworthy predictions of strain fi elds, deformed texture, and failure.This is especially important ...

Deformation twinning from grain boundaries is often observed in face-centered cubic metals with low stacking fault energy. One of the possible factors that contribute to twinning origination from grain boundaries is the intergranular interactions during deformation. Nonetheless, the influence of mechanical interaction among grains on twin evolution has not been fully understood. In spite of ext...