Foamed mortar with a density of 1300 kg/m³ was prepared. In the initial laboratory trials, water-to-cement (w/c) ratios ranging from 0.54 to 0.64 were tested to determine the optimal value for foamed mortar corresponding to the highest compressive strength without compromising its fresh state properties. With the obtained optimal w/c ratio of 0.56, two types of foamed mortar were prepared, name...

Current blast furnace technology is a two-stage ironmaking process that requires that iron ore concentrate first be formed into pellets, fired at 1260°C, cooled, transported to the blast furnace, and then re-heated to approximately 1500°C to produce pig iron. This heating, cooling, and then reheating wastes a great deal of energy, which would be saved if the ironmaking process had only a single...

Stabilisation/solidification (S/S) is an effective technique for reducing the leachability of contaminants in soils. Very few studies have investigated the use of ground granulated blast furnace slag (GGBS) for S/S treatment of contaminated soils, although it has been shown to be effective in ground improvement. This study sought to investigate the potential of GGBS activated by cement and lime...

Using ground granulated blast-furnace slag (GGBS) under different alkaline conditions, we studied the mechanisms and extents of Cr(VI) reduction and sorption and compared them to reactions with Portland cement (PC). We also investigated the effects of mixing PC/GGBS ratios on Cr(VI) dissolution after carbonating the substrates. We observed a complete sorption and reduction of Cr(VI) to Cr(III) ...

Binder using ground granulated blast-furnace slag with specific surface area 20000cm2/g (GGBS20000) for ultra-high strength concrete were examined. As a result, it was possible to improve flowability of mortar by use proposal binder GGBS20000. And GGBS20000 also had the effect on improvement early-age mortar. However, which used silica fume more effective than produce high long-term strength.