OBJECTIVE To evaluate the microhardness of resin-modified glass-ionomer cements (RMGICs) photoactivated with a blue light-emitting diode (LED) curing light. MATERIAL AND METHODS Thirty specimens were distributed in 3 groups: Fuji II LC Improved/GC (RM1), Vitremer/3M ESPE (RM2) and Filtek Z250/3M ESPE (RM3). Two commercial light-curing units were used to polymerize the materials: LED/Ultrablue...

statement of the problem: various methods such as light emitting diode (led) have been used to enhance the polymerization of resin-based orthodontic adhesives. there is a lack of information on the advantages and disadvantages of different light curing systems. purpose: the aim of this study was to compare the effect of led and halogen light curing systems on the shear bond strength of orthodon...

The aim of this study was to assess polymerization ability of three light-curing units by evaluating the influence of the light source, curing regimen and permeant (water or ethanol) on sorption, solubility and amount of residual monomers of a dental adhesive. Specimens of Adper Single Bond 2 were fabricated using a stainless steel circular matrix (8 mm x 1 mm). One quartz-tungsten-halogen (QTH...

Introduction: The aim of this study was to in-vestigate the effect of irradiation duration and distance of light tip to prepared samples in two different light curing unites on the degree of conversion of resin composite. Materials and Methods: Conventional halogen and blue Light emitting diode (LED) units were used for polymerization of an Opalis resin com-posite. The conversion measurements w...

Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...

The effect of reducing the damaged organ cell number and size in different areas human body (in case carcinomas, cerebral thrombosis, heart attacks, chest cervical vertebrae areas, coronavirus dental pulpitis) was studied using a halogen lamp. tests were conducted on patients when curing diseases periodic implementation lamp (500 W) with duration from 0.5 to 1 hour, while controlling its light ...

This study evaluated in vitro the pulp chamber temperature rise induced by the light-activated dental bleaching technique using different light sources. The root portions of 78 extracted sound human mandibular incisors were sectioned approximately 2 mm below the cementoenamel junction. The root cavities of the crowns were enlarged to facilitate the correct placing of the sensor into the pulp ch...

UNLABELLED The purpose of the study was to compare temperature rise during polymerisation of resin based composites (RBCs) with two LED light curing units (LCUs) compared to a halogen control light. METHODS Forty-five extracted molars, patients aging 11-18 years were used. Thermocouples (TCs) were placed in contact with the roof of the pulp chamber using a 'split-tooth' method. Teeth were pla...

OBJECTIVES To determine the influence of the light curing units on the shear bond strength of orthodontic brackets. MATERIAL AND METHODS Seventy-two premolars were divided into six groups (n=12): Group I: brackets bonded with Transbond and polymerization with halogen light; Group II: Transbond and LED; Group III: Fuji Ortho and halogen light; Group IV: Fuji Ortho and LED; Group V: Fuji Ortho,...