The Balgrist hip socket, initially made entirely of HDPE (high molecular weight polyethylene), now made of outer titanium alloy shell that faces the bone of the acetabulum has been in clinical use for 10 years. The purpose of this presentation is to illustrate the biomechanical principles that have governed this unique design and to present the clinical results that we have obtained until the e...

Microfibrillar composites (MFCs) from recycled high density polyethylene (R-HDPE)/recycled poly (ethylene terephthalate) (R-PET) (75/25 w/w) were made through reactive extrusion and post-extrusion strand stretching. The resultant MFCs could be processed at HDPE processing temperature. The compatibility between microfibers and R-HDPE matrix was improved through compatibilizers. Of the three comp...

In recent years, the development and use of polymeric nanocomposites in creating advanced materials has expanded exponentially. A substantial amount of research has been done in order to design polymeric nanocomposites in a safe and efficient manner. In the present study, the impact of processing parameters, such as, barrel temperature, and residence time on the mechanical and thermal propertie...

Thermal behavior of plastic materials can be improved by knowing thermal degradation kinetics for the optimal design and operation of pyrolysis process. In the present study, thermogravimetric analysis has been used for the non-isothermal kinetic study of waste high-density polyethylene pyrolysis under nitrogen atmosphere at different heating rates 10, 20 and 40 °C/min. The kinetic parameters, ...

The effect of substrate interferences from high-density polyethylene (HDPE) on the ability to associate an ignitable liquid residue with the corresponding liquid standard, using statistical procedures, is demonstrated. Gasoline, kerosene, and lighter fluid, at three different evaporation levels, were spiked onto HDPE and subsequently burned to generate simulated ignitable liquid residues (ILRs)...

The inert and oxidative flash pyrolysis of High Density Poly-Ethylene (HDPE) is studied 6 up to 20 000 K.s, under pressure up to 3.0 MPa and at temperature ranging from 1000 K to 7 1500 K. These conditions are considered to represent those waited onboard a hybrid rocket 8 engine using HDPE as solid fuel. Recycling applications may also find some interest. The 9 pyrolysis products are quantified...

High-density polyethylene (HDPE) melts have been previously identified as having an unusually high degree of molecular order, but the rheological implications of this have heretofore not been explored. This has been a serious oversight, inasmuch as HDPE melt processing is one of the major tasks of the world's polymer industry. Here, we investigate several industrial samples of HDPE, covering a ...

The fiber characteristics (i.e., the fiber type, morphology, and dimension) and polymer melt flow index (MFI) significantly affected mechanical properties of sugarcane fiber/HDPE composites. The length and diameter of sugarcane fibers followed a lognormal distribution before and after compounding. The long fibers had a significant reduction in the dimension and aspect ratio during compounding. ...

Using laboratory soil chambers a nonscaled representation of an agricultural raised bed was constructed. For a sandy loam soil, 1,3-dichloropropene (1,3-D) and chloropicrin (CP) were applied at 5 cm depth with an excess of water (simulated drip irrigation). Application was made under both high density polyethylene (HDPE) and virtually impermeable film (VIF) covering the soil bed (the furrow was...

Nonylphenol (NP) is used as an antioxidant and plasticizer in some plastic products. After the discovery of its endocrine-disrupting potential, concern over human exposure to this chemical has increased. Recently, a group in Germany estimated the average daily intake of NP from food (7.5 microg/day), excluding water. In the present study, NP, octylphenol (OP), and their respective ethoxylates (...