The efficiency of the ideal stirling cycle assumes, that the cylinder volumes are isothermal and that the temperatures in the cylinder volumes are identical to the temperatures in the heat sink and the heat source. The efficiency is then identical to the efficiency of the Carnot cycle. However, in a real stirling machine the cylinder volumes are nearly adiabatic instead of isothermal, and the h...

sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

The location of heat transfer pinch point in evaporator is the base of determining operating parameters of organic Rankine cycle (ORC). The physical mathematical model seeking the location of pinch point is established, by which, the temperature variations both of heat source and working fluid with UA can be obtained. Taking heat source with inlet temperature of 160 C as example, the matching p...

abstract: in this study, al 2 o 3 /eg and tio 2 /eg nanofluids as coolants have been used in the double-tube heat exchanger. the hot solvent inlet heat exchanger must be cooled down with a specified amount. we can use nanofluids as coolants in the heat exchanger for optimization of the heat transfer area. therefore, the efficacy of nanofluids as coolants is verified. furthermore, flow rate of c...

in this paper by the introduction of the basic equipment of a solar cooling system, solar hydrogen ammonia refrigeration system as a solar cooling technique will be discussed. using heat collector and absorption refrigeration allows us to use residual heat, for cooling, heating and producing hot water and boiling water .this research focuses on methods of heat transfer from the sun into the gen...

a mathematical model of a continuous reheating furnace has been developed to identify the design and operating parameters that significantly affect furnace performance. in this study, the furnace is modeled 3 dimensionally and themonte carlomethod is used to find the overall absorption factor. the overall absorption factor is then used to calculate the energy balance for furnace walls, the gas,...

The heat transfer analysis of considering heat-generating components with different locations of two side-wall fans in a three-dimensional desktop computer was investigated in this paper. Herein, the well-known computational fluid dynamics (CFD) code of PHOENICS was employed to simulate the dissipative heat transfer in a ventilated enclosure. The SIMPLEST algorithm with the hybrid scheme was ut...