Oxy-fuel coal combustion with flue gas re-circulation is known to be one of the most promising methods for reducing CO2 emissions from coal combustion power plants. In the oxy-fuel system, the combustion atmosphere consists of only O2 separated from air and flue gas re-circulated from a stack. Therefore, the flue gas is dominated by CO2 without any nitrogen gas. The most attractive potential as...

In this paper, the residual stress of thermal spray coatings in gas turbine component by curvature method has been studied. The samples and shaft were coated by hard WC-12Co cermets using high velocity oxy fuel (HVOF) after preparation in same conditions. The curvature of coated samples was measured by using of coordinate measurement machine (CMM). The metallurgical and Tribological studies has...

Oxy-fuel combustion is a clean coal technology based on firing fuel in an enriched oxygen atmosphere to obtain a high CO2 concentration in the off-gases. This technology can be combined with the co-firing biomass and the use of blends of coal and biomass can compensate for the fact that the gas properties in the furnace in an oxycombustion process differ from the air-firing case (oxy-firing flu...

Oxy-fuel combustion is one of the energy utilization technologies for CO2 capture which is ready for commercial demonstration. System steady-state simulation is an effective tool to help us understand the thermodynamic properties and adjust operation conditions of oxy-fuel combustion system. Moreover, dynamic simulation is essential for understanding the dynamic characteristics of the system, w...