to investigate the hot deformation behavior of 17-7 ph stainless steel, hot compression tests were carried out at the temperatures of 950, 1050 and 1150 oc and strain rates of 0.001 s-1 to 0.1 s-1. accordingly, the hot working behavior was studied by the analyses of flow stress curves, work hardening rate versus stress curves, exponent- type constitutive equations and deformed microstructures. ...

Low-cost TiB whiskers reinforced titanium matrix composite (TMCs) was fabricated with enhanced mechanical performances using in situ technologies and hot working. Morphologies observation indicates that needle-like TiB whiskers with a hexagonal transverse section grow along the [010] direction due to B27 crystal structure and its growth mechanism. Mechanical properties tests show that the mecha...

Hot deformation of Nd-Fe-B magnets has been studied for more than three decades. With a good combination of forming processing parameters, the remanence and (BH)max values of Nd-Fe-B magnets could be greatly increased due to the formation of anisotropic microstructures during hot deformation. In this work, a methodology is proposed for visualizing the material flow in hot-deformed Nd-Fe-B magne...

Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...

hot spots are among the most serious operational issues in furnaces as they may result in the destruction of tubes. hence, it is essential to locate such hot spots precisely on the tube surfaces inside the industrial furnaces in order to secure a safe design and operation. in the current study, we have extended the model proposed by talmor in order to precisely locate the combustion hot spots o...

Abstract In this research, a radial basis function artificial neural network (RBF-ANN) model was developed to predict the hot deformation flow curves of API X65 pipeline steel. The results of the developed model was compared with the results of a new phenomenological model that has recently been developed based on a power function of Zener-Hollomon parameter and a third order polynomial functio...

Caterpillar has been collaborating with suppliers to analyze steel castings for the tendency to form hot tears using a newly developed damage-based model. The implementation and application of the damage-based hot tear model is presented. The implementation is through an uncoupled simulation of the solidification and deformation problems using commercial software with a user-defined constitutiv...

In this study, a new non-equiatomic and cost-effective high-entropy alloy (HEA), Al8Cr12Mn25Fe35Ni20, was designed using thermodynamic parameters prepared by arc melting. The subjected to homogenization at 1200 °C hot-rolling reduction of 50%. hot deformation behavior mechanism were studied varying strain rates ranging from 0.01 10 s?1 temperatures 900° 1100°C via plane compression tests Gleebl...