Magnesium alloys are primarily used in aeronautical and automobile industry in wide variety of structural characteristics because of their favourable combination of tensile strength (160 to 365 MPa), elastic modulus (45 GPa), and low density (1 740 kg/m), which is two-thirds that of aluminium). Magnesium alloys have high strength-to-weight ratio (tensile strength/density), comparable to those o...

In this paper, the inelastic damage process in Engineered Cementitious Composites (ECC) in the high stress concentration zone adjacent to the head of an embedded anchor under tensile load was examined experimentally and numerically. An FEM model together with a tensile strain-hardening material model of ECC was developed to simulate the damage process leading to final failure. Experimental obse...

Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...

This paper investigated the effects of combining fibers with self-consolidating concrete (SCC). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (PPS) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. All plans were subjected to fresh concrete tests. For mechanical behavior of...

PURPOSE The purpose of this study was to evaluate the tensile strength of surgical synthetic absorbable sutures over a period of 14 days under simulated oral conditions. METHODS Three suture materials (polyglycolic acid [PGA], polyglactin [PG] 910, and poly (glycolide-co-є-caprolactone) [PGC]) were used in 4-0 and 5-0 gauges. 210 suture samples (35 of each material and gauge) were used. All o...

In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

In Malaysia, there is no research done on the tensile strength of structural size timber. The tension stress found in the Malaysian code of practice, MS 544: Part 2: 2001, was not determined directly and it was taken as 60% of the bending strength values of small clear specimens. This paper presents the results of the tensile test on structural size timber specimens from selected Malaysian Trop...

background and aims. polymethyl methacrylate (pmma) is widely used for the fabrication of removable prostheses. silver nano-particles (agnps) have been added to pmma because of their antimicrobial properties, but their effect on the mechanical properties of pmma is unknown. the aim of this study was to investigate the effects of agnps on the tensile strength of pmma. materials and methods. for ...

objective: the aim of the present study was to compare microtensile bond strengths (μtbs) of glass fiber posts to different parts of intra-radicular dentin using conventional method and one-shot technique under different light intensities. materials and methods: twenty-eight single-rooted teeth were prepared to receive fiber posts: group 1: conventional method at light intensity of 600 mw/cm2; ...