Shear testing is one of the most complex testing areas where available methods and specimen geometries are different from each other. Therefore, a modified shear test specimen (MSTS) combining the simple uniaxial test with a zone of interest (ZOI) is tested which gives almost the pure shear. In this study, material parameters of polypropylene (PP) and high density polyethylene (HDPE) are first ...

Interest in extending the high cycle fatigue life of structures has increased in the last decade of the 20th century. Since a long fatigue life depends on keeping cyclic loads near or below the fatigue threshold, understanding near-threshold behavior is now all the more important. This paper reviews the status of the ‘threshold of fatigue’ and to a lesser extent its relation to the ‘fatigue lim...

Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from –55°C (in the worst case of storage before takeoff) to +200°C (flight). Direct bonded copper (DBC) substrates are u...

The equivalent linear elastic fracture model based 0:;': an R-curve (a curve characterizing the variation of the critical energy release rate 'WIth the crack propagation length; IS generalized to describe both the rate effect and size effect observed in concrete. rock or other quasi brittle matenals. It is assumed that the crack propagation velocity depends on the ratio of the stress intensity ...

in this paper, the mean value of strain energy density criterion has been used to predict the critical fracture load in specimens with u-shaped notch under bending loads. an equation for calculation of averaged strain energy density in this zone has been presented. bending loads under mode i have been considered. two cases have been studied: 1) the control volume only includes the semicircular ...

The aim of this paper is to simulate the propagation linear elastic crack in 3D structures using latest innovation developed Ansys software, which Separating Morphing and Adaptive Remeshing Technology (SMART), order enable automatic remeshing during a simulation fracture behaviors. ANSYS Mechanical APDL 19.2 (Ansys, Inc., Canonsburg, PA, USA), used by employing special mechanism ANSYS, smart gr...

This paper presents the implementation of eXtended Finite Element Method (XFEM) in general-purpose commercial software COMSOL Multiphysics for first time. An enrichment strategy is proposed, consistent with structure software. To this end, each set functions, an additional Solid Mechanics module incorporated into numerical framework, coupled compatible modifications to internal variables. The L...

Background: Linear elastic fracture mechanics (LEFM) applies to sharp cracks, although crack sites such as holes and slots are often blunt cracks with nonzero widths. The advancement in finite element method (FEM) has enabled the calculation of stress intensity factor (SIF) for unstable growth prediction, regardless shape size, but calculations differ from contour co...