nanoparticles of manganese-dioxide synthesized by mechano-chemical reaction were used foras(iii) and as(v) sorption from water environment. the influence of a milling time of manganese-dioxide on sorption was examined with batch procedure. sorption as a function of contact time was investigated. kinetic of sorption, for both as(iii) and as(v), was fast. the equilibrium condition for milled sorb...

mechanical alloying of binary and ternary elemental powder mixtures with the nominal compositions of mg2ni and mg(2-x)mnxni (x= 0, 0.05, 0.10 and 0.15 at. %) were carried out in a planetary ball mill for various milling times of 5, 10, 15, 20, 30 and 60 h. x-ray diffraction and field emission scanning and transmission electron microscopy were used for the characterization of the milled products...

although cu and fe are immiscible under equilibrium conditions, they can form supersaturated solid solutions by mechanical alloying. in this paper, nano-structured of the metastable cu-fe phase containing 10, 15, 20 and 25% wt fe were synthesized by intensive ball milling for 15h, in order to achieve a solid solution of fe in cu. the phase composition, dissolution of the fe atoms into the cu ma...

Although embedded Ge nanocrystals (NCs) have been grown by variety of techniques and its properties have been studied extensively, intrinsic properties of isolated Ge NCs have not been studied properly due to lack of proper synthesis technique. Here we report on the synthesis of freestanding Ge nanoparticles (NPs) down to approximately 7 nm using ball milling technique and study its structural ...

Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...

Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...

The formation of ZnSe via a mechanically-induced self-sustaining reaction (MSR) from a Zn/Se mixture showed that only size reduction and mixing of the reactants without product formation occurred during the induction period prior to ignition. Therefore, all mechanical energy supplied by the planetary mill during this time, called the ignition time (tig), was used exclusively in the activation o...

The ball milling technique has been successfully applied to the synthesis of various materials such as equilibrium intermetallic phases, amorphous compounds, nanocrystalline materials, or metastable crystalline phases. However, how the phase composition and nanoscale microstructure evolute during ball milling in various materials is still controversial due to the complex mechanism of ball milli...

solid solutions of ag-cu were prepared via ball milling process, for about 5-30 h. the cu-20at%ag and cu-3.64at%ag composition were investigated by x-ray diffraction technique. it was realized that the solid solubility level could be increased by increasing the initial solute content in the mixture. in addition, shifts in peak positions of silver and copper were observed with milling time. the ...

The stability behavior of low immersion helical end milling processes is investigated in this paper. Low radial immersion milling operations involve interrupted cutting which induces chatter vibration under certain cutting conditions. Time Finite Element Analysis (TFEA) is suggested for an approximate solution for delayed differential equations encountered during interrupted milling. An improve...