in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...

In this paper, the modelling and control of the moisture content of the particles in a batch Fluidised bed dryer are studied. First, a lumped mechanistic model is developed to describe the heat and mass transfer between solid, gas and bubble phases and experimental validation shows that the model can be used to predict the particle moisture content and temperature profiles during the drying pro...

Hemp concrete is more and more recommended by eco-builders because hemp is a renewable plant, recyclable and does not degrade within time. To integrate this material into buildings, it is important to study its hygrothermal behaviour. In this paper, two models have been investigated: a heat transfer model (Th) and a hygrothermal model accounting for heat and moisture transport through building ...

in this paper by the introduction of the basic equipment of a solar cooling system, solar hydrogen ammonia refrigeration system as a solar cooling technique will be discussed. using heat collector and absorption refrigeration allows us to use residual heat, for cooling, heating and producing hot water and boiling water .this research focuses on methods of heat transfer from the sun into the gen...

The self-heating process in a laboratory scale experiment has been modelled using the Comsol Multiphysics software. In the simulations the gas flow and air movement in the volume and heat diffusion in the bulk were taken into account however only one reaction in the pellets bulk is considered. The input data is found from measurements of the reaction chemistry and the heat transfer properties. ...

In order to improve the efficiency and rate of heat transfer in heat exchangers, various techniques such as increasing the heat transfer coefficient are proposed. This study is devoted to the investigation of heat transfer coefficient variations due to the addition of CuO, TiO2 and CuO/TiO2 nanoparticles into a shell and tube heat exchanger. CuO/TiO2 nanocomposite was synthesized using mechanic...

Measurements of soil volumetric moisture content and temperature were made at 2, 4, 7, 10, and 15 cm below the surface of a bare field soil, over a 1-week period at 20-min intervals. The conductive heat and liquid moisture fluxes were calculated for the soil layer 7–10 cm below the surface, and the water vapor flux was then determined from both the energy transfer and mass transfer equations. W...

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...

basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. an efficient approach to studying cooling system for diesel engine is a 3d computational fluid dynami...