A crosslinked hole-extracting electrical contact is reported, which simultaneously improves the stability and lowers the hysteresis of perovskite solar cells. Polymerizable monomers and crosslinking processes are developed to obviate in situ degradation of the under lying perovskite. The crosslinked material is band-aligned with perovskite. The required free carrier density is induced by a high...

Graphene oxide (GO) is employed as a hole conductor in inverted planar heterojunction perovskite solar cells, and the devices with CH₃NH₃PbI₃-xClx as absorber achieve an efficiency of over 12%. The perovskite film grown on GO exhibits enhanced crystallization, high surface coverage ratio as well as preferred in-plane orientation of the (110) plane. Efficient hole extraction from the perovskite ...

Recently, inorganic and hybrid light absorbers such as quantum dots and organometal halide perovskites have been studied and applied in fabricating thin-film photovoltaic devices because of their low-cost and potential for high efficiency. Further boosting the performance of solution processed thin-film solar cells without detrimentally increasing the complexity of the device architecture is cr...

In article number 2005671, Jiajiu Ye, Yueli Liu, Peter Reiss, and co-workers use a bilayer of tin oxide nanoparticles, doped with different amounts ammonium chloride, as the electron transport layer in lead halide perovskite solar cells. It enables improved transfer from light harvesting gives access to high open circuit voltage, power conversion efficiency enhanced stability.

the interaction of copper oxide nanoparticles and copper ions and proteinase k from tritirachium album limber has been investigated employing uv spectroscopy and kinetics measurements. the aim of this study was to evaluate the effect of nanoparticles of cuo for proteinase k. in this paper we compare the effect of copper oxide nanoparticles with the effect of copper ions on proteinase k stabilit...

We have developed a general route for combining Ni, Fe, Co, Cu, and Pd in nanoparticle using the exsolution mechanism from LaFe0.7Ni0.1Co0.1Cu0.05Pd0.05O3 perovskite oxide precursors. The strong adherence of nanoparticles to support yields attractive catalytic properties dry methane reforming, such as coke resistance thermal sintering suppression. reduction precursors at 700 900 °C yielded NiCo...

Nanoparticles of perovskite-type LaCo0.5Fe0.5O3 (LCFO) were fabricated by sol–gel method.Thermal decomposition process of the complex precursor was examined by means of differentialthermal analysis–thermal gravimetric analysis (DTA/TGA). X-ray diffraction (XRD) resultsshowed that single perovskite phase has been completely formed after calcination at 750 °C. Inaddition, the surface morphology a...

The perovskite-structured La2CuO4 nanoparticles have been synthesized via an ultrasonic-assisted co-precipitation route using octanoic acid as organic surfactant, and the phase composition, morphology, lattice parameters and size of nanoparticles are characterized through Fourier transform infrared spectrosco...

Well-dispersed Rh(OH)3 nanoparticles were deposited in the interlayer galleries of a Dion-Jacobson type layered perovskite (ACa2Nb3O10: A=H or K). X-ray photoelectron spectra and zeta potential measurements suggest covalent bonding (Rh-O-Nb) between the nanoparticles and the niobate sheets. After calcination of Rh(OH)3/KCa2Nb3O10 at 350 degrees C in air, interlayer Rh(OH)3 nanoparticles were tr...

Flexible electronics have attracted great interest in applications for the wearable devices. Flexible solar cells can be integrated into the flexible electronics as the power source for the wearable devices. In this work, an ultrasonic spray-coating method was employed to deposit TiO2 nanoparticles on polymer substrates for the fabrication of flexible perovskite solar cells (PSCs). Pre-synthesi...