An experimental setup, based on the laser-induced deflection technique, is developed to measure simultaneously the 244 nm laser absorption, scattering, and luminescence on optical components. The different techniques and methods that have been specifically developed to obtain both high resolution (micronic) and sensitivity (a few 10(-7) of the incident power for the absorption, 10(-8) for scatt...

All individual phases of the ternary Cr–C–N system including stable and metastable ones can be deposited at low temperature by metalorganic chemical vapor deposition (MOCVD). These growth processes are mainly based on the use of bis(benzene)chromium as chromium source and various co-reactives. Then, from a good control of the reactive gas phase, it is possible to combine these MOCVD processes t...

Plastic optical parts require antireflective as well as hard coatings. A novel design concept for coating plastics combines both functions. Symmetrical three-layer periods with a phase thickness of 3/2pi are arranged in a multilayer to achieve a step-down refractive-index profile. It is shown mathematically that the equivalent index of symmetrical periods can be lower than the lowest refractive...

The relevance of intracavity dispersion control in passively mode-locked ultrashort-pulse laser was recognized soon after the appearance of the first systems operating in the femtosecond domain.' Negative dispersion that is due to wavelengthdependent refraction in a pair of Brewster-angled prisms combined with positive material dispersion proved to be an efficient and convenient means of contro...

A tunable polarimeter using multilayer interference coatings as both reflection polarizer and transmission phase retarder is described. The portable device bolts onto existing chambers and its rotation axis is precisely aligned to the beam. The upstream transmission phase retarder is tunable by varying its incidence angle, and the downstream polarizer is tunable by translating a laterally grade...

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cy...

This paper discusses two common problems, “weld tenting” and low coating thickness over the external weld, and their causes in traditional three layer polyolefin pipeline coatings. To tackle these problems, a new approach to applying multilayer polyolefin coating to pipes is introduced. The new system consists of side-extruding high density polyethylene over a graded structure polyethylene (GSP...

Dispersive optical interference coatings (chirped mirrors - CMs) are designed by computer optimization of an analytically calculated initial multilayer. Traditionally, the relevant properties of the CM (reflectance and the frequency-dependence of the phase shift upon reflection) are optimized to match frequency-domain targets. We propose a novel target function that quantifies directly the capa...

We have fabricated periodic multilayers that comprise either Si/Tb or SiC/Tb bilayers, designed to operate as narrowband reflective coatings near 60 nm wavelength in the extreme ultraviolet (EUV). We find peak reflectance values in excess of 20% near normal incidence. The spectral bandpass of the best Si/Tb multilayer was measured to be 6.5 nm full width at half-maximum (FWHM), while SiC/Tb mul...

It is well known that injection of glass fibre–reinforced plastics (GFRP) causes abrasive wear in moulds’ cavities and runners. Physical vapour deposition (PVD) coatings are intensively used to improve the wear resistance of different tools, also being one of the most promising ways to increase the moulds’ lifespan, mainly when used with plastics strongly reinforced with glass fibres. This work...