Wideband multilayers designed for various applications in hard X-ray to Extreme UV spectral regions are based on a layered system with layer thicknesses varying largely in depth. However, because the internal structure of a thin film depends on its thickness, this will result in multilayers in which material properties such as density, crystallinity, dielectric constant and effective thickness ...

Nanostructured three-dimensional constructs combining layer-by-layer technology (LbL) and template leaching were processed and evaluated as possible support structures for cartilage tissue engineering. Multilayered constructs were formed by depositing the polyelectrolytes chitosan (CHT) and chondroitin sulphate (CS) on either bidimensional glass surfaces or 3D packet of paraffin spheres. 2D CHT...

The layer-by-layer (LbL) deposition technique is a self-assembly process that allows the coating of material's surface with nanostructured layers of polyelectrolytes, allowing to control several surface properties. This technique presents some advantages when compared with other thin film assembly techniques, like having the possibility to coat surfaces with complex geometries in mild condition...

Influence of NaCl and NaBr and their concentration on assembly of polyelectrolyte multilayers and their compression behavior was studied using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(4-styrenesulfonic acid-co-maleic acid, 1 : 1 SS:MA) sodium salt (PSSMA 1 : 1) as the building blocks. Stepwise growth of the PSSMA/PDADMAC multilayers was characterized by a quartz crystal microba...

Influence of assembly pH on compression and Ag nanoparticle synthesis of polyelectrolyte multilayers was studied using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(4-styrenesulfonic acid-co-maleic acid, 1:1SS:MA) sodium salt (PSSMA 1:1) as the building blocks. The thickest multilayers turned out at pH 4. A homogeneous compression by a silicone rubber stamp increased significantly t...

Commercial EUV lithographic systems require multilayers with higher reflectance and better stability then that published to date. Interface-engineered MoISi multilayers with 70% reflectance at 13.5 nm wavelength (peak width of 0.545 nm) and 71% at 12.7 nm wavelength (peak width of 0.49 nm) were developed. These results were achieved with 50 bilayers. These new multilayers consist of Mo and Si l...

Reactive multilayer systems represent an innovative approach for potential usage in chip joining applications. As there are several factors governing the energy release rate and stored chemical energy, impact of morphology microstructure on reaction behavior is great interest. In current work, 3D reactive microstructures with nanoscale Al/Ni multilayers were produced by alternating deposition p...

An energetic micro-initiator through integrating Al/Ni nano-multilayers with Cu film bridge was investigated in this study. The Cu film bridge was initially fabricated with wet etching, and Al/Ni nano-multilayers were alternately deposited on the surface of Cu film bridge by magnetron sputtering. The periodic layer structure of Al/Ni nano-multilayers was verified by scanning electron microscopy...

Herein we experimentally study magnetic multilayer metamaterials with broken translational symmetry. Epitaxially-grown iron-gold (Fe-Au) multilayers modulated using Fibonacci sequence-referred to as magnetic inverse Fibonacci-modulated multilayers (IFMs)-are prepared using ultra-high-vacuum vapor deposition. Experimental results of in-situ reflection high-energy electron diffraction, magnetizat...

The effect of the strain on the magnetic properties of metallic multilayers has been investigated by ab initio studies. Our results indicate that the magnetic anisotropy energy (MAE) of an Fe(001) surface can be drastically enhanced by capping with 5d elements. By choosing Ir-Fe multilayers as a model system, we demonstrate that the MAE which depends on the composition and the structure of the ...