The continuous technological advance and increasing availability of new base metal alloys and ceramic systems in the market, coupled to the demands of daily clinical practice, have made the constant evaluation of the bond strength of metal/porcelain combinations necessary. This study evaluated the metal/porcelain shear bond strength of three ceramic systems (Duceram, Williams and Noritake) in c...

The beneficial effect of boron on the mechanical properties of austenitic stainless steels is well documented [1, 2]. A number of studies have confirmed that boron segregates to grain boundaries, in a variety of steels and nickel-base alloys (for example, [3, 4, 5]). Segregation of boron is known to occur via two mechanisms (for example, [1]): Equilibrium segregation is caused by the high bindi...

Background Nickel-titanium alloy is applied to biomaterials such dental wire, stents and so on, because they have outstanding capacities for corrosion-resistant, adequate mechanical strength and shape-memory [1,2]. On the other hand they have a risk of metal allergy because of leaking nickel ions from them in aqueous conditions. It is not clear the reason why nickel causes allergy and what the ...

Nickel-chromium (Ni-Cr) alloys used in fixed prosthodontics have been associated with type IV Ni-induced hypersensitivity. We hypothesised that the full-thickness human-derived oral mucosa model employed for biocompatibility testing of base-metal dental alloys would provide insights into the mechanisms of Ni-induced toxicity. Primary oral keratinocytes and gingival fibroblasts were seeded onto ...

The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromiu...

Hexavalent chromium (Cr(VI)) is a serious environmental pollutant and human toxicant. Mammalian cells are very sensitive to chromate as they lack efficient chromate detoxifying strategy, e.g., chromate-reducing genes that are widely present in prokaryotes. To test whether introduction of prokaryotic chromate-reducing gene into mammalian cells could render higher chromate resistance, an Escheric...

In this work, chromium disilicide nanowires were synthesized by chemical vapor deposition (CVD) processes on Si (100) substrates with hydrous chromium chloride (CrCl3 · 6H2O) as precursors. Processing parameters, including the temperature of Si (100) substrates and precursors, the gas flow rate, the heating time, and the different flow gas of reactions were varied and studied; additionally, the...

ABSTRACT The isothermal cross section through the ternary phase diagram Nb-Ni-Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb7Ni6) at this temperature, and the solubility of chromium in NbNi3 is approximately 5 at.%. Under these circumstances the low-temperature (cubic) modification ...

Ternary amorphous W–xCr–yZr alloys containing 9−38 at % tungsten, 15−42 at % chromium and 39−73 at % zirconium were successfully prepared by direct current (DC) magnetron sputtering technique. The corrosion rates of all the examined sputter−deposited W–xCr–yZr alloys were in the range of 1 × 10−3 mm/y or lower which are nearly one order of magnitude lower than those of the sputter−deposited tun...