The aim of the present study was to propose a panel being sensitive to the direction of heat transfer. For this purpose, a vertical rectangular cavity with prescribed dimensions was prepared and filled with water as the working fluid. A vertical mid-plane solid partition was installed within the cavity. Two relatively wide openings were created at the top and bottom of the partition and they we...

A nanofluid is mixture of nano sized particles and a base fluid. This paper investigates by using laboratory based double pipe heat exchanger model, the performance of nanofluid containing about 48.46nm  particle size nanoparticles (ZnO) without or with addition of nonionic surfactant Rokanol K7 (500ppm) into the base fluid double distilled water to prepared three different concentrations 1.0%,...

In the present paper, the effect of water-CuO nanofluid on the radiator heat transfer of an automobile, Peugeot 405 XU7 engine type is investigated experimentally. The experiments are carried out for the radiator water (water-ethylene glycol with a volume fraction of 80-20, respectively) as a base fluid and water-CuO nanofluid with the volume fraction of 0.5% and 1%. Sodium Dodecyl Sulfate (SDS...

Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...

The effect of γ-Al2O3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-Al2O3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. Since the properties of γ-Al2O3-water nanofluids were variable, they were ...

in this study, the natural convection heat transfer of variable properties al2o3-eg-water nanofluid in a differentially heated rectangular cavity has been investigated numerically. the governing equations, for a newtonian fluid, have been solved numerically with a finite volume approach. the influences of the pertinent parameters such as ra in the range of 103-107 and volume fraction of nanopar...

An analytical study was performed to study effects of thermo-diffusion and chemical reactions on a three-dimensional MHD mixed convective flow of dissipative fluid along an infinite vertical porous plate with transverse sinusoidal suction velocity. The parabolic partial differential equations governing the fluid flow, heat transfer, and mass transfer were solved using perturbation technique and...

A nanofluid is mixture of nano sized particles and a base fluid. This paper investigates by using laboratory based double pipe heat exchanger model, the performance of nanofluid containing about 48.46nm  particle size nanoparticles (ZnO) without or with addition of nonionic surfactant Rokanol K7 (500ppm) into the base fluid double distilled water to prepared three different concentrations 1.0%,...

In this study, a reputable Kalina cycle system, KCS 11, is simulated and analysed. Within this efficient cycle, there are three heat exchangers: the first heat exchanger is designated for heat absorption from the heat source, the second heat exchanger is designed for heat release to the cold source, and the third heat exchanger is designed for energy recovery. In order to achieve precise si...