Nanogenerators are the backbone of self-powered systems and they have been explored for application in miniaturized biomedical devices, such as pacemakers. Piezoelectric nanogenerators (PENGs) several advantages, including their high efficiency, low cost, facile fabrication processes, which made them one most promising nano power sources converting mechanical energy into electrical energy. In t...

In this work we analyze the coupled piezoelectric and semiconductive behavior of vertically aligned ZnO nanowires under uniform compression. The screening effect on the piezoelectric field caused by the free carriers in vertically compressed zinc oxide nanowires (NWs) has been computed by means of both analytical considerations and finite element calculations. We predict that, for typical geome...

In this work, we design and fabricate a wireless system with the main operating device based on zinc oxide (ZnO) nanowires. The main operating device is based on piezoelectric nanogenerator (NG) achieved using ZnO nanowires grown hydrothermally on paper substrate. The fabricated NG is capable of harvesting ambient mechanical energy from various kinds of human motion, e.g., footsteps. The harves...

A flexible and robust piezoelectric nanogenerator (NG) based on a polymer-ceramic nanocomposite structure has been successfully fabricated via a cost-effective and scalable template-assisted hydrothermal synthesis method. Vertically aligned arrays of dense and uniform zinc oxide (ZnO) nanowires (NWs) with high aspect ratio (diameter ∼250 nm, length ∼12 μm) were grown within nanoporous polycarbo...

Single-crystal n-type GaN nanowires have been grown epitaxially on a Mg-doped p-type GaN substrate. Piezoelectric nanognerators based on GaN nanowires are investigated by conductive AFM, and the results showed an output power density of nearly 12.5 mW/m(2). Luminous LED modules based on n-GaN nanowires/p-GaN substrate have been fabricated. CCD images of the lighted LED and the corresponding ele...

We report on the electrospinning of poly(vinylidene fluoride-hexafluoropropylene) [P(VDF-HFP)] nanofibers doped with silver nanoparticles for the preparation of a polymer based nanogenerator (PNG). It has been found that the yield of the piezoelectric phase is increased by the addition of silver nanoparticles. Furthermore, defects in the P(VDF-HFP) electrospun fibers are removed resulting in a ...

Abstract Self-powered biomedical implants improve the life of patients and lower risks associated with battery replacement. Piezoelectric energy harvesters that generate electricity from cardiac motions are among potential candidates to be used in self-powered implants, such as pacemakers. In this context, lead-based ceramic piezoelectric nanogenerators (PNGs) were emerged, which toxic suscepti...

We have studied the piezoelectric potential output of a ZnO wire/belt functionalized with p-type oligomer (2,5-Bis(octanoxy)-1,4-bis(4-formyl phenylene vinylene) benzene) (OPV2) when it was deflected by an atomic force microscope (AFM) tip in contact mode. In comparison to the ZnO wire/belt without oligomer coating, an extra positive voltage peak was observed prior to the appearance of a negati...

Using phosphorus-doped ZnO nanowire (NW) arrays grown on silicon substrate, energy conversion using the p-type ZnO NWs has been demonstrated for the first time. The p-type ZnO NWs produce positive output voltage pulses when scanned by a conductive atomic force microscope (AFM) in contact mode. The output voltage pulse is generated when the tip contacts the stretched side (positive piezoelectric...