This paper conducts a comparison study using KES-FB and PhabrOmeter to measure 58 selected warp knitted fabric hand properties. Fabric samples were selected and measured by both KES-FB and PhabrOmeter. Results show differences between these two measurement methods. Smoothness and stiffness values obtained by KES-FB were found significant correlated (p value = 0.003 and 0.022) to the PhabrOmeter...

Three popular 100% cotton knitted fabrics, (plain single-jersey, 1x1 rib and interlock) were subjected to five cycles of four different washing and drying regimes. This was in order to investigate the effect of laundering with detergent as opposed to water, and tumble drying against line drying. The main aim of this work was to systematically investigate the effect of the principal washing and ...

This paper is focused on the segmentation of the fabric weave patterns for the urgent requirement of fabric imitative design and redesign.The weave patterns related to the fabric yarn are determined by a new technology, which is called bidimensional mode decomposition based method. The proposed method first iteratively decompose the underlying fabric image into a number of intrinsic mode functi...

This paper introduces the foundations of a new mechanical level of detail method dedicated to knitted fabric simulation. This method consists as a reduction of the knitted cloth parameters number, decreasing the configurations space dimension of the studied cloth. We stress the importance of the choice of an efficient parameters reduction function in order to make the method usable. The consequ...

In this paper, finite element model of woven fabric target has been investigated which is impacted by a cylindrical projectile. Fabrics are impregnated with Shear Thickening Fluid (STF). The effects of the (STF) have been considered as frictional effect. The STF has been made (Nano Silica and Polyethylene Glycol (PEG)) and then diluted by ethanol proportion of 3:1. Yarn pulling out test from in...

cotton/polyester knitted fabrics as a major production of textile industry was treated with titanium dioxide nanosized particles. the treated fabric with nanosized tio2 became whiter with a good self-cleaning property. also the discoloration of reactive black 5 dye was studied and reported. the stabilization of tio2 on cotton/polyester knitted fabrics by citric acid (ca) with sodium hypophospha...

Many fabric defects are very small and undistinguishable, which makes them very difficult to detect by only monitoring the intensity change. Faultless fabric is a repetitive and regular global texture and Fourier transform can be applied to monitor the spatial frequency spectrum of a fabric. When a defect occurs in fabric, its regular structure is changed so that the corresponding intensity at ...

The physical and dimensional characteristics, i.e. course wale spacing, stitch density, tightness factor, diameter, porosity, stability bursting strength of single jersey knitted items containing lycra yarn with the variations in length content have been examined a detail investigation on filament has discussed this study. Six different samples were identical cotton but contents length. After c...

Automated image analysis of textile surfaces allowed determination and quantification of intrinsic yarn path variabilities in a 2/2 twill weave during the lay-up process. The yarn paths were described in terms of waves and it was found that the frequencies are similar in warp and weft directions and hardly affected by introduced yarn path deformations. The most significant source of fabric vari...

In this paper, details of the experimental work to characterise the tensile properties of a UHMWPE single yarn are presented. The yarn specimens were extracted from a plain woven fabric made of Spectra 1000 fibres, and a gripping method which could prevent yarn slippage and ensure the failure occurs in the gauge section was employed. Tensile tests were conducted at three strain rates of 3.3×10,...